Jump to content
SAU Community

Recommended Posts

Hey im starting to looks for rims for my black r33 s2 NA (4stud)

and went into Dande TTF the tyre factory

Found nice set of rims.

they are Lenso RS-5 black in 18's.

does anyone have these rims or have any pictures of these rims fitted on a car prefferably a skyline :thumbsup: so i get a rough idea of what it will look like.

thanks

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/
Share on other sites

If the link posted are the same wheels as you're going for/getting, they're gonna look shit (fitment wise). They're only 7" wide with an offset of +42 (higher than standard).

Fail from me. :D

Edit: Sorry for my comment, you didn't ask for opinions. :D:)

Edited by adam-__-
Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3773880
Share on other sites

Guys, he doesnt say anything about sizes, just what the style he is looking for. I found that photo and put it up there, so they may not be the sizes he is looking for. Look at the wheel style rather than the wheel size and go from there.

From my experience, those brand of wheels won't offer much wider wheels or lower offsets anyway.

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3774135
Share on other sites

Well, I think thats the information he is after. He said he's getting 18's though. Do you know what sizes they do come in? May as well give the guy a hand while we're here!! Btw, dont ask me. I'm shit with the whole offset thing!

They only come in 17 x 7.0 and 18 x 7.5 from what I can see and I highly doubt they come in any other offset.

Edit: They come in 19 x 8.0 as well. No offset was mentioned for any width.

Edited by adam-__-
Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3774166
Share on other sites

  • 3 weeks later...

thanks for all the info guys and yea opinions welcomed good or bad....im looking for this style in four stud ...i dont know anything about offset so i was just hoping these would sit nicely??

i am 100% on getting 18inch just hard to come by in black four stud.

post-38129-1208782347_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3812850
Share on other sites

thanks for all the info guys and yea opinions welcomed good or bad....im looking for this style in four stud ...i dont know anything about offset so i was just hoping these would sit nicely??

i am 100% on getting 18inch just hard to come by in black four stud.

How they'll look when fitted will depend A LOT on what the offsets are.

You're after 18" so they'll be 7.5" wide (not wide at all).

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3813508
Share on other sites

ok my mum rang up few shops to get quotes and she got told that putting the Lenso rs5 on my 33 n/a would be illegal due to the offset????? and if in a collision insurance wouldnt cover me.

its annoying the hell out of me trying to find decent 4four stud black rims...i found some finally and they wont fit properly due to offset :P

anyway we got reccomended to go to Motorsport wheels and tyres or something in dandenong so might have a look there.

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3821035
Share on other sites

ok my mum rang up few shops to get quotes and she got told that putting the Lenso rs5 on my 33 n/a would be illegal due to the offset????? and if in a collision insurance wouldnt cover me.

its annoying the hell out of me trying to find decent 4four stud black rims...i found some finally and they wont fit properly due to offset :D

anyway we got reccomended to go to Motorsport wheels and tyres or something in dandenong so might have a look there.

That offset/track or wheel modification rule is farkin stupid.

Your wheels can't be 25mm wider/thinner than the widest wheel specified by the manufacturer for that vehicle, you can't increase/decrease the car's total track by 25mm, etc.

If you want to keep your car 100% legal, don't modify your car at all. Any modification will be illegal unless you get some engineers certificate.

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3821942
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Temporary. Sorry about the inconvenience while we sort some issues.
    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
×
×
  • Create New...