Jump to content
SAU Community

S13, S14, S15, R32 Gtst & Gtr, R33 Gtst, Ca18det, Sr20det Red Top And Vvti, Rb20et, Rb25det, Rb26dett


Recommended Posts

Okay ppl I have a heaps of parts to get rid of

1) SR20DET Red top Engine, It has inlet manifold, alternator, power steering pump, complete head, block, crank rods and pistions, sump. There is no turbo, exhuast manifold, throtle postions sensor, loom, computer, distributor or coil packs. This engine had number 2 conrod cap come loose and jam the engine. There is no damage to the crank, block or head but the cams are worn.

Perfect for a rebuild

$300 ono

2) SR20DET Starter motors x2 $100

3) SR20DET Starter motor with loom x1 not sure what speedo plug this is for my guess is that it is for a S14 5 speed $100

4) Passenger S13 side guard $50 there is a small dent

5) Clutch master cylinder to slave cylinder pressure line $50

6) CA18DE standard ecu $ free

7) Standard S13 front castor rods $ free

8) S13 front head light projector style $ free

9) Standard RB25DET exhaust manifold with studs $50

10) 180sx front LHS head light cover painted mat black and straight $50

11) S13 airconditioner condenser and dryer straight with not many bent fins $20

12) S13 standard front sway bar with good bushes $20

13) S13 CA/SR engine cross member $75

14) R32 RB20DET engine cross member $100

15) O2 sensors 3 pin x2 $50 ea

16) Standard S15 side mount intercooler with all piping $100

17) S13 HID instrument cluster with HID attachment speedo is at 105,649km no Tacho works perfectly $ 50

18) R32 GTR matched set crank, rods and pistons $200

19) S15 SR20DET VVTI head complete in fair condition $750

20) S15 SR20DET block bare fair condition $350

21) S15 SR20DET crank fair condition $150

22) S15 SR20DET standard injectors with rail and reg $100

23) S15 SR20DET Inlet manifold top and bottom $50

24) S15 SR20DET oil pump good condition $50

25) S15 SR20DET TPS excelent condition $50

26) S15 SR20DET harmonic standard balancer $50

27) Walbro 550hp intank fuel pump new still in box $150

28) SR20DET viscous engine fan $20

29) S13 brake booster fair condition $50

30) CA18DET igniter pack $ free

31) SR20DE distributors in excelent working order x2 $75 ea

32) S13 SR20DE engine loom complete un cut/murdered $25

33) S14a SR20DE engine loom complete un cut/murdered $25

34) RB25DET engine loom complete un cut/murdered $50

35) Complete S15 SR20DET VVTI in parts all that is needed is bearings and gasket kit. comes with ACL 20 thou over sized pistions with hasting pistion rings on standard rods with ARP con rod studs, complete head with port job and standard cams, freshly honed block and excelent crank, fresh oil pump and chain, fresh chain tensioner, standard harmonic balancer and engine mounts etc.

No turbo, distributor, coil packs, loom, computer, flywheel.

$ 1,250

I have pictures of all parts but my camera is to detailed and the pictures are upwards of 2.5MB so pm me your email and wahat your interested in and I'll send them to you. Sorry about the inconveniance

All prices are negotable pm me on here or call me on 0406 046 136

I'm located in Ipswich QLD.

Cheers

Luke

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Was that with the cas upside or correct way up?
    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
×
×
  • Create New...