Jump to content
SAU Community

Recommended Posts

It did look fair tough in real life, but white was always the plan so I painted it up and cleared it today, so now the wing and lip are ready to go, but I reckon I'll hold off on mounting them properly until I at least get some rims.

One more pic just before I took it off.

s5003247du4.jpg

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Maybe. 2 of the blokes at Adelaide Tyrepower had matching 4 doors, this was one. It did look fking tough with the Weds meshies it was sporting back in the day. Doesn't look so crash hot now though :(

Not gonna bother fixing it either, just gonna track it and thrash the crap out of it :) It has a fair bit of rust that was hidden before, so it's no great loss of a shell really.

Well I pulled the back out a little bit today with the aid of a tow rope + the cressida (ghetto style is how I roll). I can fit a tail light in there now and can almost fit the bumper back up so thats forward progress I spose.

And I also got bored so decided to chuck the lip on all painted. I reckon it looks aight (save for the fact it desperately needs wheels)

s5003268vi5.jpg

s5003269lx8.jpg

WOO WOO exhaust is fixed with a Blitz Nur Spec :D :D with the silencer in, it's fkn quiet as a mouse. No more waking the neighbours when I get home from work at like 3 - 4 in the morning :P:)

Reo is a wee bit closer to being aligned too, little more bashing to be done :cool:

tail lights sourced - minty fresh series 2 items for $65 each thank you very much :ban:

Also grabbed some alloy cradle lock spacers and steering lock spacers. Solid cradle and more lock shall be FTW when I get around to fitting them :O

Will take a heat gun to the bar later on and see if I can get it back to normal shape (or close enough to) :sick:

Getting there :P

Series 2 look ever so slightly different, in that they have reflectors in the middle of the hotplate bits and a horizontal crease line that lines up with the bottom of the boot/top of rear bar. I reckon they look a little nicer then the earlier tail lights.

I forgot to mention before, my SSRs rocked up too :O 16 x 8 +20. Fitted on the front with a 20mm spacer to clear the brakes should look pretty tough, but I'll do that when the 16 x 9 +16s I just bought arrive. Until then they are rears (will use aformentioned 20 mm spacer on the front with my 16 x 8 +38 Watanabes)

I've also come across some Fabulous (brand) rims available in 16inch with widths up to 10j and offsets that go right down to -31 :ban:

If the 9j I've just bought fit well on the front, I'll go 10j +12 on the rear :sick:

Just wondering, why did you sell your jzx100?

Because I am a f**king idiot :domokun:

No seriously, get one. Nothing will seem as good any more (hence why I have absolutely no problem throwing the 32 into a cliff, it's only skyline junk to me)

I'd get another one but I'm trying to slow down spending on cars (modding them is pretty exxy).

Edited by AndrewJZX100

haha ok then. I thought that maybe they didn't feel sporty or something as they look much bigger. Iv never been in one. Their just SO hot. Wanna send me some pics? I remember yours out at lala, even think i got some footage. Same day i was out on track. Looked like it had some go!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
×
×
  • Create New...