Jump to content
SAU Community

R32 Gtr Is Gone :(

ib6ub9

By ib6ub9,
in Australian Capital Territory

 Share

Recommended Posts

ib6ub9 Collaborator

ib6ub9

Posted
Posted

Hello all,

I have had many issue with my GTR over time as many of you are more than aware of.

Spun bearing in 2002. A big thank you to trojan for the wonderful rebuild. What a car she was then.

In May 2006 I made the mistake of letting someone drive the car who therefore crashed it in to a tree. We were ok. that damage was suprisingly not as bad as first thought.

It took a 20 month saga at a known workshop in queanbeyan to fix. Who left several vital induction parts open to atmosphere, let alone an oil line not connected!

In Jan 2008 after being on the road for a mere 1900kms from the smash repairer a all to familiar knock was noticed. :) Did the problem happen form accident. Not sure. Either way. Heartbreaking.....

In the past months whilst at Trojan, A choice was made on how far can you keep doing this.

Today the car was sold as a wreck. :D And vey sad about it as i've always enjoyed the culture of SAU and the people involved with it, along with the great work and friendship by John and Angelo at Trojan motorsport.

I will in time be looking at another GTR. A sucker for them.

But thanks all for your advice, conversations and specially thanks to a car that was and always will hold a sentimental value to me for a long time. I'll stilll be on here looking everyday as i do. Hope to you around.

Here is a picture of Brads wedding and the last few pictures of being alive.

Cheers :)

Phil....

post-13678-1215132352_thumb.jpg

post-13678-1215132367_thumb.jpg

post-13678-1215132404_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/226694-r32-gtr-is-gone/
Share on other sites
datto260Z Experienced

datto260Z

Posted
Posted

That sucks dude. It was an awesome looking GTR and I dont blame you for the decision in the end. It takes a lot of dedication to be able to continue something when everything keeps going wrong.

Hope to see you cruisin in another GTR soon though. (Better be a 34 though :))

Link to comment
https://www.sau.com.au/forums/topic/226694-r32-gtr-is-gone/#findComment-3991795
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      RB25DE NEO with Haltech ECU

      By Murray_Calavera · Posted

      You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • GTSBoy
      RB25DE NEO with Haltech ECU

      By GTSBoy · Posted

      Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      Could be correct. Meter might be that far out. Compare against a known 5 ohm 1% resistor.
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap.  (edit: I went out and did it right now, the line I had chosen did appear to have no vacuum on it, it used to go to the front of the intake, I've now completely blocked that one off at the bracket that holds several vacuum lines by the firewall.  I T'd into the vacuum line that goes from that bracket to the vacuum pump at the front of the car, but no change in the MAP readings).  Using the new vacuum line that has obvious vacuum on the hose, im still only getting readings between -6.0 and -5.2.  I'm wondering why the ECU was detecting -5.3 when nothing was connected to the MAP nipple and ECU MAP selected as the source. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
×
×
  • Create New...