Jump to content
SAU Community

Recommended Posts

  • Replies 177
  • Created
  • Last Reply

Top Posters In This Topic

it dusnt matter what you buy ul always want sumthg else...ive had every nissan import...selted with my 32 gtst and my first car was a 33 got sick of ceing them everywhere......32 is a much nicer looking car i reckn...why nt thrash the 20 while u save for engine swap thats what i been doing the only prob is i dnt think its gonna die....my two cents bro....

ive owned an rb25 powered r32 with 280hp and a rb20 powered r32 with 320hp. the rb25 as u know feels alot better effortless power. where the rb20 needs to be ringed out. i also have a r34 with a rb26 and after owning 2 turbo 31s 2 r32s an r34 im accually wanting to sell my r34 to go back to r32 gtr. dunno if that will help.

33 s are very common and they remind me of a vt commo. 32's look way nicer gotta love the old boxy shape

CT commo?/?

carfront.jpg

PHTO0005.jpg

dont think so R33 FTW, and cheap mods, nahhhh:

HKS2530's

HKS extension kit

HKS fuel pump and fuel reg

HKS EVC 6

Tomei manifolds

Tomei Pon type B's with cam pulleys

Tomei cam cup stud kit

Tomei timing belt

Tomei cam cover baffles

N1 Water and oil pump

Apexi Fc D'Jetro

Mines stainless pro front pipe

Kakimoto cat replacement and N1 mega cat back.

Sard 700's

Essential catch can

Splitfires

HKS oil cooler

and some other crap... gets assembled and tuned next week by XSpeed....

  • 5 months later...

yeh i preffer r32. Personally I woundn't buy r33. Except for r33 gtr. I gotta say, they r nice :) actually any gtr r nice.

1st r32

2nd r34

3rd r33

RB25det on r32 sounds nice. I wanna do it to mine......how much u rekon?

I have a 33 and after driving my mates R32 with the RB20 id have to say the 33 feels better. But with a little bit of money spent on the 32 you could make it the same. Bung a bigger motor in it and your power probs will be solved. Lots of parts availabel for the RB25. Best engine though would be the RB30.

But I gotta say, there are few nice looking R33 going around. I saw one in Mandurah with like really glossy paint job. Looked awesome :( I want that paint job lol.

Yeh, Rb30. nice. Wat is the price difference in rb25 and rb30? which ones cheaper to convert?

Depends how cheap a 30 you want to build..

To put an RB30DET (with R32 RB25DE head) into an R32 GTSt is easier than putting an RB25.

Cost wise, it would probably be cheaper* to buy a 33 halfcut and put the RB25 in.

*You could build a cheap RB30DET but it really depends on usage and power goals as to how much it would cost.

33 s are very common and they remind me of a vt commo. 32's look way nicer gotta love the old boxy shape

1st ill punch you in the head for comparing a skyline with a commo.

2nd ill agree with the fact that SOME 32's look nice, but there are also SOME insane 33's out there.

theres probably a reason why there are so many 33's around. they are reasonably price and they have balls, big turbo charged balls. :D

my2cents

Everytime someone buys an R33, Jesus dreams up another plague for the jews to suffer through and he is running slim on ideas.... like Stephen Kings Lamp Monster. Nyah Nyah

.... ROFL... MAO......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...