Jump to content
SAU Community

Recommended Posts

its the bushes on the armature.. not a loose nut holding the fan on(it spins in tightening direction). you need some conductive grease on the armature/brushes.. or a whole new setup.

thanks for the reply. pardon me for being a noob. How do i get to the location of the armature? i need to investigate the problem. Please point me to the right direction. cheers

Edited by Giveitall
ive done a write up in the faq section.. searching this section will give you the rewards your after

thanks mtopxseret6. Will have a crack at it.

for anyone looking to solve the problem. heres the link to mtopxseret6's write up.

http://www.skylinesaustralia.com/forums/Fa...hl=mtopxsecret6

Edited by Giveitall
excelent write up mate! just need some better pictures :thumbsup: i might give mine ago in the next few days and thats in a 33 so ill fill in the blanks at the start of your guide so we have one for a 32 and a 33.

that would be excellent jack. i m not a handy person myself. will definitely need your guide for the r33.

keep us updated.

Just notice that you are in SA too. (maybe i can pay u for your service for this?)

thanks

Edited by Giveitall
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What's on the front of their building?
    • Jax Tyres Smithfeild Ive gone there a few time, well for tyres. on my 3rd visit I spoke to the dude and told how i just got slugged for rotors, brakes ect. His reply was golden; have you read whats on the front of the building. Never forgot it.       before picture, good friend got all these goodies installed.  Well time to study, servicing, maintenance all before this weekend driving lesson.  
    • Hello, first of, I’ve looked at many threads on this code but none have helped me, if you know one that will help me feel free to post a link.   Now to my problem. Recently I was driving and noticed the check engine light came on. I went home and did the test to see what code it gave. I got the 21 code but everything seems fine with the car, no misfire, idle is good, acceleration is the same as when I bought it. I mean no signs of obvious failure. If no misfire is happening I can rule out the coil packs right? Which is about 98% of posts saying it is. If anyone has had this happen and found the issues let me know please. No other lights are on.   The car WAS due for an oil change. I since then changed it so idk if that triggers code 21. Either way it hasn’t turned off.
    • Your both right, it may hold a bit longer then.  Soon I need to change the synchros, should I fit the billet plate while I'm at it? Or just a waste of money?
    • Some of the east coast US Stagea got together this past weekend at Lime Rock Park in CT for Grid Life Circuit Legends. This is probably my favorite pic of the shoot with @Morgan.Mundahl on IG. Hope we get more stags out next year! i think I spotted 5 other than my own at the event. 
×
×
  • Create New...