Clutch Lining

[Karadeniz]

Excuse my lack of knowledge..

but can someone explain to me whether a non puck type clutch is effective for a 250-330 rkwk rb25 skyline.

Basically i've been told only about puck type clutches 3 , 5 , 6 etc etc. BUT i was also told about non puck type clutches such as "ceramic lining clutches" which do not have individual pucks (buttons), but unsure if these are ok. Say for example a ceramic lining with 1000kg

I got some info on them here below, but don't understand if theyre ok or generally used?

Ceramic

Of all types of linings, ceramics offer the highest co-efficient of friction at around 0.48-0.55. This means they can be used with a lower clamping force pressure plate as the lining provides the grip. But because of this attribute, they cause a lot of wear on mating surfaces and shudder can be commonly encountered. Ceramics can take more heat than an organic material, but deliberately slipping the clutch tends to burn up the flywheel and pressure plate more than the lining.

[Karadeniz]

bump

help please

[Karadeniz]

?