Jump to content
SAU Community

- Sweet And Simple R33 ! - Pics And Couple Youtube Clips...


Recommended Posts

Heya all,

Just thought i'd finally get off my bum and post some pics of my ride.

Plus i just bought a new digi camera ( Canon 10mp baby ! ) and just testing and playing around with it.

Had this car for around lil over 6 months now and bought it completely stock, Just tried to keep it sweet and simple. Steer away from the rice, and going with a JDM look ( low and tough ).

R33 95' GTS25t Type M

- Rb25det

- Apexi SAFC II ( tunes by DynoTunz )

- Apexi intake w/ home made heat shield

- Apexi N1 full zorst'

- HKS new design SSQV blow off valve

- Greddy front mount

- Turbosmart Tee @ 10psi

- Custom Catch Can

- JDM Concept reservoir socks !!! WOAH !

- Tein Coilovers ( on lowest setting )

- Cusco Strut brace

- Carbon Fibre gearknob / Autometer boost gauge / Apexi auto timer

- Rare Type M Grill ( well i dont see many around , ebay is the bomb ! )

- Potenza Re001 ( these are the shizzle ! )

- Top fuel sticker !!!! ( Adds 10kw @ the wheels for real ! ) :cool:

- Enkei RS evo II 16"( not on atm , no tread , Old school !!! )

- Dancing Drift Monkey FTW !!! ( solar power .. green peace dood ! ) :down:

Pics:

n52889572212727477015mg8.jpg

img0069rl8.jpg

img0071am9.jpg

img0070mi6.jpg

img0066iv1.jpg

img0097es3.jpg

img0102lc7.jpg

img0107yv8.jpg

img0106ge5.jpg

Youtube clips:

Just bought and install a new design HKS SSQV ( thanks to Steve ) ...

Just a quick strap, down a private road. No speeding on public roads people ! ( before HKS SSQV fitted )

Comments plezz...

Edited by lilhaulerz
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...