Jump to content
SAU Community

Recommended Posts

I am selling an r33 gtst series 2 manual.

The car is white it has about 140,000 k's on the clock paintwork is imaculate all over no dints chips or scratches and is all the same shade of white.

i done the major service on it at 100,000 k's a year ago which involved changing all the oils, water pump, plugs coolant, thermostat and oxy sensor. since then though i have still got it serviced every 5,000k's with mobil 1 which i have reciepts for all services and the plugs and coolant and fuel filter have also been changed since then.

A new exedy heavy duty clutch was also put in 5000ks ago along with a new starter motor. Car also has other mods which support a fairly large power figure.

This car is absolutely faltless inside and out, all the interior is standard series 2 even the cd player, the car also has factory fitted abs . It rides on 18 inch dished wheels with yokahama rubber, brakes were also changed and machined all round about 3500 ks ago.

Over all car is perfect doesnt need a cent spent on it for a very long time looks unbelevable and drives beautiful, has alot more modifications and detials i wont mention but if you are interested i can be contacted on 0437078793 my name is robert and i am located in melbourne. car also has 14 months registration on it and will be supplied with a current road worthy certificate by workshop of buyers descression. price is also negociable.

Link to comment
https://www.sau.com.au/forums/topic/238976-fs-r33-gtst-seies-2/
Share on other sites

will consider a swap plus cash adjustment for the car if the car being swaped is just an every day car!

price is 14000 dollars not negociable puts out a massive 265 rwkw's on 14.5 pounds, forgot to mention turbo is like 4000 k's old i still have the reciept for it. this is a very cheap price for a car this clean and standard looking with this much power.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...