Jump to content
SAU Community

Recommended Posts

hi y'all,

i have four wheels for sale

2x Chrome SSR Professer S1 17x8 +38 (unsure for offset and will confirm tonight) with brand new tyres.. 235/40 (or 45?)

2x Chrome SSR Professer S1 17x8.5 +28 (unsure for offset and will confirm tonight) also with brand new tyres.. 235/40 (or45?)

these wheels came on the car and have gutter rash and other scratches etc.

also have two 4mm spacers that were on the front of my car when it was purchased which the buyer can have

come over for a look or a test fit (i have a jack)

looking for $900 willing to negotiate (tyres alone were $640)

PS - im pretty sure that the fronts (17x8) will not fit on a R32 gts-t m-spec (4pot front calipers) without a spacer (unless you grind down the caliper cover). ZCR test fitted the rears and it looked... awesome!! fills the guards nicely

PPS - the picture below is the wheels on my car with the old tyres still on them

call 0410 149 689

Nerm

Edited by Ex!$t3nZ
Link to comment
https://www.sau.com.au/forums/topic/239949-fs-ssr-professors-s1/
Share on other sites

  Ex!$t3nZ said:
2x Chrome SSR Professer S1 17x8 +38 (unsure for offset and will confirm tonight) with brand new tyres.. 235/40 (or 45?)

2x Chrome SSR Professer S1 17x8.5 +28 (unsure for offset and will confirm tonight) also with brand new tyres.. 235/40 (or45?)

for some reason i cant edit my original post but i thought that i should point out that the stud pattern is 5x114.3 although the more astute readers will notice that i mentioned that ZCR had them on his 32 which as you all should know is 5x114.3 as well. Note sure if you guys knew that the JizZseX100 was 5x114.3 or not

  Gus- said:
whats the width????

and any pics of them on a 32 or what????

what do you mean by width.. in the original post i said that the fronts were 8 inches wide and the rears were 8.5.. or are you refering to the tyres which are 235/40 (or45) all around

no pics of the 32 unfortunatley..

  MANG said:
i gave the number a call but the guy said it was the wrong number haha

oops my number us 0410 146 684.. my bad. i was at the physio anyway so i wouldnt have answered

im not sure if the wheels fit the front with the spacers.. i havent checked

  MANG said:
tried calling that one and it says youve got incoming call restrictions activated haha.

wtf.. sim card must have slipped or something?? this phone has been giving me nothing but grief lately, i might need to get a new one..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • 21 is explicitly the coils detected as the issue. Is it guaranteed the actual issue? No. Just the ECU thinks it is. When you say rattling, describe it better, get an audio clip as best you can if possible.
    • Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
    • @Rusty NutshI mate. Do you have a pinout diagram for the na neo auto ecu? 
    • Yeah thats the plan now. 🤞
×
×
  • Create New...