Jump to content
SAU Community

Phat Jap Fgk 3" --> 3.5" Extremely High Flowing System + 550cc Injectors + R33 5 Stud + Z32

nigelswazi
 Share

Recommended Posts

nigelswazi Mentor

nigelswazi

Posted
Posted

Got the following parts I no longer need after being defected and changing a few bits:

Location - Adelaide Contact - PM or SMS 0404998591

Japanese Fujitsubo Giken FGK Super High Flow Cat Back System to suit R33 GTS-t,

First up is my Japanese Fujitsubo Giken FGK Super High Flow Cat Back System to suit R33 GTS-t, will fit R34 with slight shortening and flange flipping round at cat end. This exhaust is extremely high flowing starting with 3" mandrel bend piping up to the flange and at this point the exhaust expands out to 3.5" piping all the way to the tuff cannon muffler with awesome tip. This makes clearance that bit better at the centre of the car for speed bumps etc whilst maintaining maximum flow.

I bought this system for $700 from local wreckers but then spent $200 on a new centre muffler as the old one had I small hole I didn't notice upon purchase for which I still have the receipt and warranty on that part. This exhaust is flanged in the centre making transportation a breeze I can undo the flange if required by buyer to make fitting into a normal car easier. Pics are below the black appearance to the lower half of the exhaust is from it being spray matt black so as not to draw attention from the cops I can remove the paint if required but I recommend it. Note silencer is not included in sale this was borrowed to clear defect.

Price - $400

fgkexhaustxi6.th.jpgthpix.gif

fgkexhaustangle2gf8.th.jpgthpix.gif

fgkmuffleryl5.th.jpgthpix.gif

fgkexhaustexpandingdp7.th.jpgthpix.gif

--------------------------------------------------------------------------------------------------------------------------------------

Venom 550cc Injectors Straight Fit for SR20 and RB25

4 x Venom 550cc Injectors Straight Fit for SR20 and RB25 complete in SR20DET fuel rail complete with pressure regulator (injectors can be removed for buyer if required). These injectors were bought new and used for a couple of months on my gf's car but have now been removed as part of stripping car. These are a straight fit injector no need to cut off plugs etc just install rail if using on SR20 or injectors if using on RB and away you go.

Price - $375

550injectorsqc2.th.jpgthpix.gif

--------------------------------------------------------------------------------------------------------------------------------------

R33 Front Hubs and Uprights

Selling a pair of R33 Front Hubs and Uprights perfect for conversion in excellent condition.

Price - $150 pair

uprightsti0.th.jpg

--------------------------------------------------------------------------------------------------------------------------------------

Z32 AFM Plug + Clip & Loom

Selling a Z32 AFM Plug complete with installation clip and around 25cm of loom to make installation easy. I will also include a guide on fitting to CA, SR and RB powered Nissan vehicles.

Price - $20

-----------------------------------------------------------------------------------------------------------------

Location - Adelaide

Contact - PM or SMS 0404998591

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • oHBoy.
      Starter motor replacment teeth count.

      By oHBoy. · Posted

      roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      5th November if you want to come out for a spin wakfield
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
    • GTSBoy
      R34 GTT triple gauge pod plug pinout?

      By GTSBoy · Posted

      I think he was only proposing to use the wire, not the sender. Simply because it runs from the right place to the right place. Personally, I wouldn't hack up the factory wiring like that. I'd just lay in the Defi loom.
×
×
  • Create New...