Jump to content
SAU Community

Recommended Posts

Hello all ,

I have for sale my rb26/30 setup.

The motor has a knock in number 3 (New bearings needed)

Motor has the following inc.....

RB26/30

Rb30 block 20tho over sized , A8 turbo block

ARGO I-Beam Rods

Wisco forgies

ARP Main Bearing bolts

ARP Head Bolts

RB26 Head , 10 Hours of porting (JUST DONE + Full RECO)

STD CAMS

ADJ Cam gears

RB26 STD intake manifold (6 Throttles ETC.)

*Note injectors and rail are not for sale. Due to them going on my GTR. This setup has made 640HP behind a glide and a HKS T51r SPL BB. Easy 10 / 9 second motor behind the right tranny and driver!

We think the motor has spung a bearing. Mainly coz I havent started my motor for about a year. Also i am now doing a Ls2 Turbo setup now.

Motor has to go

Price $5500 HAS TO GO!! so make a offer!!!

PM me or call on 0418 787 314 I'm located on the Gold Coast.

Edited by richie$$$rich
Link to comment
https://www.sau.com.au/forums/topic/249830-rb2630-for-sale/
Share on other sites



  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...