Jump to content
SAU Community

Recommended Posts

R32 GTR Gunmetal Grey

R33 GTR motor

N1 oil/water pump

Full Balanced motor

Main bearings (race series)

Conrod bearings (race series)

Gates timing belt

ARP Head stud kit

ARP Rod bolts

Head Rebuilt with all Geniune Nissan Items

Ported and Polished head

OS Giken Cam Gears

Tomei Cam Shafts

Tomei Full Metal Gasket kit

XForce Dump Pipes

HKS 700 injectors and (new plugs for injectors)

$1200 7ltr sump full baffel internals

Tomei oil restrictor in head

Greddy timing cover

Forged cp pistons

To much to list on motor ....

New DBA 4000 slotted series brakes Penrite oil and TRW pads

New Clutch Extreme 1200kg 6 puc

Full 3inch Fujitsubo Exhaust

Rebuilt Gear Box 4,5 syncro replaced new

R34 GTR Turbos

TEIN Coilovers

330km Japan By TBO

After Market front /rear strut braces

HKS Pod Filters

R33 GTR Wheels

New GTR fuel pump

New clutch master and slave cylinder

Car Made 281KW@ wheels on 15 pounds with current AFM and Fuel Pump/Turbos Will make just over 300 with Z32 afm and fuel pump very realiable!!!

But with Z32 AFM Bosch pump and hks Turbos the car made 371kw@wheels have dyno sheets

There has been no expense spared on this motor it is built tough....

$22500 ono pm for details will try to have pics asap with in the next few days thanks.....

PS: probably a few things missed

Edited by luke james
Link to comment
https://www.sau.com.au/forums/topic/251365-r32-gtr-94-model/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
×
×
  • Create New...