Jump to content
SAU Community

Recommended Posts

Just wondering why my car (rb20det) makes no boost if i rev it in neutral ?

just thinking about it, with the clutch pedal depressed, sitting still, its really the same as if i was driving with the clutch engaged at speed.

The engine is still revving to a certain RPM, therefore consuming a certain amount of air (correct me if im wrong).

so shouldn't the turbo be spooling ?

Link to comment
https://www.sau.com.au/forums/topic/254434-silly-question-probably-but/
Share on other sites

There is no load that's why you won't see boost in neutral when just pushing the throttle.

However.... if you modulate the throttle you can achieve positive boost in neutral. Play with it let it rev down and hit the throttle a bit, you'll see a + reading. It's not sustainable but possible :)

turbos only respond to load (exhaust energy). no load no boost . to over simplify it . less air = less fuel = less exhaust energy.

if you floor it and let off before redline (or not if your so inclined) you should see the positive side of the boost gauge but f all

Does it have a stock ecu?? The R32 GTS-T (or mine anyway) with a stock ecu will NOT build any boost in neutral. I didnt even think about this until i had my troublesome after market ecu pulled out. It would spool up in neutral with that in, but as soon as it was out i thought i had a blown turbo lol. Just a factory safety measure....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is it alright to top up with just another green coolant?
    • thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...