Jump to content
SAU Community

Recommended Posts

Price reduction :

Click me!

PRICE REDUCTION AS IM LEAVING THE COUNTRY!!! IT MUST GO

Lotus Exige S. Delivered May 2007. Custom order from Lotus, took 7

months to procure

Sports Pack, Super Sports and Lifestyle Pack optioned. LSD option also

applied. Lifestyle colour Chrome Orange optioned.

Custom Carbon Fibre/Kevlar Roof ordered in from the USA ($7,000),

Braided brake lines and Pagid Pads.

In other words, every option that is possible has been purchased! Fully

Serviced by Barbagallo and driven 3-4 times a week to work with 2-3 track

days a year

All redline/mobil 1 fully synthetic oils used. This car is fully

capable of putting down a great time on the circuit and turning heads on

the streets

. Base Car costs 110k PLUS on road costs, Add Lifestyle ($7000), Sports

($6000)

and Super Sports ($7000), LSD ($2500) and optional Hyper Chrome

Orange Paint ($7000) total drive away is 155k! not including the

aftermarket parts.

Then ADD ON ROAD COSTS!!! in this league its about 15k

95k ONO No time wasters or tyre kickers. Reasonable Offers

Entertained.

Serious offers Please

Link to comment
https://www.sau.com.au/forums/topic/254731-fs-lotus-exige-s-2007/
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Oh yeah...if i had any money i would so buy this. I'd love a Lotus Elise.

Can i ask how tall you are tho? Cos i would imagine someone tall would possibly have issues fitting in the vehicle?

Oh yeah...if i had any money i would so buy this. I'd love a Lotus Elise.

Can i ask how tall you are tho? Cos i would imagine someone tall would possibly have issues fitting in the vehicle?

im 5'11 and no problems

the egress (getting in and out) is a tricky one but you get the routine, and it puts a smile on your face every time.

Somebody buy this so i can move to england!

Price revision to $90k! and a little bit more since there is some paint required to bring it up to 100%

Edited by Fryman
  • 2 weeks later...
  • 2 weeks later...

and a furthur drop to $84,000 to increase the chance of a pending sale in the next couple of weeks

im moving to the uk on the 6th of May.. this needs to go. It does need some panel and paint, but then the price will be reduced again for this!

If i have sold my TT roadster, i 'd be interest....

Nice car....Exige !!!

Then sell it :(

new Price : $81k. Budget in some money for paint work (do contact for more info) and you have yourself the bargain of the century! 34 gtr nur's dont sell for less then this and they didnt cost this much new 6 years ago!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
×
×
  • Create New...