Jump to content
SAU Community

Exhaust Clicking Noise...

Projectile

By Projectile,
in Engines & Forced Induction

 Share

Recommended Posts

Projectile Collaborator

Projectile

Posted
Posted

Hey guys, recently i got an exhaust fitted to my car, it is a 2.5inch cat back with a 4inch canon, when it is cold it makes a loud clicking noise, not a mechanical problem, it just makes it sound like a old corolla with a shitty exhaust. is this due to loss of air flow? even though the pipe is only 2.5inch...? anyone get this sound from their exhaust? anyone know what causes it? shouldn't it be a deep tuff sound? :blink:

Link to comment
https://www.sau.com.au/forums/topic/258232-exhaust-clicking-noise/
Share on other sites
Projectile Collaborator

Projectile

Posted
  • Author
Posted
Could be because it is a new exhaust. They take awhile to "bed" in. Some have a burning smell, some make noises.

So you're saying i should just give it some time and not worry too much?

Clicky sound? or is it more like a rasp around 3500 revs?

Haven't measured what revs it happens around, i'll have a look tonight, i'm pretty sure that it is the note it is giving out though.

Anyone else?

SKYL1N Mentor

SKYL1N

Posted
Posted (edited)

i also have a 2.5 inch cat into a 4 inch canon

i get it aswell

its around 3500 rpm and stops about 4000

however if i give it the beans it goes all the way untill 7000

i will take a video and youtube it for example tonight if im bored enough and post it.

i have been told that most NA skylines will get it and it something to do with the resonator.

p.s i recon it sounds tough when it goes to 7grand just getting faster n faster.. its something different.

Edited by SKYL1N
GTS4WD Grand Master

GTS4WD

Posted
Posted (edited)

:)

http://www.skylinesaustralia.com/forums/Rb...alic+resonating

You dont have to deal with it guys!.. just dont buy cheap generic exhausts! They will do nothing for it but make it worse!

Edited by GTS4WD
  • 8 months later...
aagreen Rookie

aagreen

Posted
Posted

Last year, I had to move to a new place where now I am living. It was very far and where I had no TV to watch and no film to see and no library to read. I had nothing else to do. Life then to me was like a desert.

wow power leveling

However, to my great surprise, I found a web bar, which was very far from the place I lived. I entered the bar that day. It was from then on that I began to immerse(使陷入)myself into Internet.

wow gold

When I first came into the bar, I didn’t know how to access the Internet. With the help of others, I opened a homepage（主页）， finding it was full of colorful and rich contents. How interesting it was！Clicking the mouse, I set up my own e-mail address under the guidance. I read sports news, entertainment news and all kinds of much other information.

I was becoming happier and happier. On holidays I sent e-cards to my friends to express my greetings. I also bought several books through e-business and ordered free e-magazines, which were of much help to my study.

wedding dress

Hearing that finding a job on Internet is very efficient, I am ready to have a try.

wedding dress

I was and am being benefited from the Internet, which makes me realize that the quality of life is as important as life itself. With the company of the Internet, I will never feel idle（闲着的） any more

wedding dress

Someday in the future we may not need to have money in our pockets. Is life easier when people don’t need to carry any coins or currency at all? Is money heavy to carry? Is it safe to carry money? Maybe in the future each of us will have only one small plastic credit card. We will use it to buy all the things we now buy with money. We will not need money to pay for things.

wedding dress

Of course we may still have some of the same problems with cards that we now have with money. Sometimes we lose money. Maybe we will lose the card. People steal money. Maybe someone will take the card. Someone may even make a card that looks like our card. Since we can’t buy anything without our card, the credit card may be no better than currency.　

Is there something even easier to use than credit cards? All of us have a thumbprint. No two thumbprints are the same. Maybe someday the government will keep people’s thumbp

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • StevenJames32
      Single Turbo Conversion On R32 GTR.

      By StevenJames32 · Posted

      Hi everyone, I'm about to complete my first single turbo conversion on my R32 GTR and I thought I would post the step by steps that I will be following. I will list the parts I have / the parts I will be buying. I will be redoing this guide after I have completed the conversion. Parts list: - 3576 turbo 0.82 v-band (coolant and oil)  - v-band top mount turbo manifold - 50mm wastegate - manifold copper gasket - titanium manifold stud kit - turbosmart 3 port boost solenoid - link can lambda kit (wideband) - link ECU - radium 12AN push in valve cover fittings (pair) - hi octane catch can - 3.5inch downpipe - screamer pipe - pipe from turbo to intercooler - intake pipe setup - power steering relocation kit - oil drain block off plate - coolant and oil lines Now onto the step by step guide (please add / correct me if there's anything I missed: 1. remove fluids, twin turbo pipes, pod filters and afm's 2. remove the factory coolant hardlines from the hot side. 3. remove heat shields  4. remove the downpipe 5. remove turbos and manifolds 6. remove factory manifold studs 7. clean whatever mess you have made 8. install power steering relocation kit 9. install new manifold studs 10. install new turbo manifold with gasket 11. install new wastegate with screamer pipe 12. install new turbo  13. install new coolant and oil lines  14. install rear oil drain block off plate 15. stop and appreciate that you now have a single turbo in your GTR 16. wipe away tears of joy and install downpipe 17. install the wideband sensor into downpipe 18.install pipe to connect turbo to intercooler 19 .remove stock boost solenoid  20. install new boost solenoid 21.  install intake setup 22. setup the rest of the can lambda kit with the ecu  23. refill fluids and hope for the best 24. ask forums for help with issues 25. fix issues 26. drive your single turbo swapped r32 GTR into the sunset. Doneeeeeeeeeee. Now I know this isn't detailed at all but I will be doing that when the conversion is done. I will be posting pics and any helpful details i can and ill make sure to fit in as much information as I can. If there's anything I should know before i do this PLEASE let me know. Stay tuned for what's next. Thanks...
    • tidi0x
      Nismo GT Pro LSD configurations

      By tidi0x · Posted

      I have wasted too much time on this, more than I am willing to admit. I hope someone can set the record straight for me.  I want to replace my Nismo (non GT pro, non GT) standard 2 way in my R33 GTST with a 1.5 way... Ideally I want to get an ATS 1.5 way Carbon LSD, but I don't want to reuse my 29 spline 5x1 axle stubs, and new 30 spline 5x1's are impossible to get a hold of ($$$), and I don't want to drop the cash on going to 6x1 stubs and axles ATM. Which leads me to the Nismo GT Pro 38420-RSS15-B5 or RSS20, as they come with new axle stubs meant for the diff, and is "Convertible" from a 2 way or 1.5 way to "Other ways", but that is where I am stuck as the documentation is a bit all over the place.  To sum up what I have found I believe the all the Nismo GT Pro PN's are convertible from 2 way, 1.5 way, and 1 way; but Nismo sells 2 skus (2 & 1.5) so people do not have to disassemble to convert it.  I found this thread on 350z but it left the question unanswered. https://my350z.com/forum/engine-and-drivetrain/620032-nismo-gt-pro-lsd-1-5-vs-2-way-and-torque.html  Essentially the way I think it all works out is like follows...  2 way  1 way  and 1.5 way would be the center pinion shaft in the 1 way block, but with the with the center flipped 180*. So the ramped side of the pinion would face the 1 way gate and act like a ramp.    I can only get my hands on the 2 way in the states, and I am not trying to get stuffed on tariffs by ordering from Japan or anywhere else. I want to confirm that if I get the 2 way I can convert it to the 1.5.     
    • StevenJames32
      Single Turbo Conversion Lines.

      By StevenJames32 · Posted

      Hi everyone, I have purchased my first GTR and I want to do a single turbo conversion to it. I've been doing as much research as i can and there are a few things that I can find and need to know. I need to run a coolant feed, coolant return, oil feed and oil return for my turbo setup. Here's what I know so far: On the hot side of the rb26 there is coolant feed, oil feed and oil return. Coolant return will be going around the front of the engine to where the thermostat is located. I will need to block off the rear oil return port. I will be running a turbosmart boost solenoid so any of the factory boost stuff wont be needed. Now onto what I don't know: 1. What do I do with the coolant / vacuum hardlines that run around the back of the motor?. 2. What do I block off or loop or move or remove?. I will be running the OEM intake manifold. 3. Is there anything in particular I need to buy for the cold side of the rb26?. I already have the intercooler and pipes sorted. If you have any pictures or information it would be appreciated. Thanks....  
    • Murray_Calavera
      "Cheap" bolt on turbo on RB25DET NEO

      By Murray_Calavera · Posted

      The fab work can be as simple as a couple of silicon hoses and clamps to the factory piping. 
    • joshuaho96
      "Cheap" bolt on turbo on RB25DET NEO

      By joshuaho96 · Posted

      Just sounds like either way you need to do some fab work to get everything to fit, so why limit yourself at that point? If the GCG high flow option is zero effort in and out swap though I'd probably do that. It's almost certainly lowest risk, lowest cost, etc. The HKS GTIII-RS option that Kapr mentioned is laughably expensive for what it is, they charge the exact same for two turbos on the RB26 so their margins are off the charts on that thing.
×
×
  • Create New...