Jump to content
SAU Community

Rb25/30 Engine Package

Shano3000
 Share

Recommended Posts

Shano3000 Proficient

Shano3000

Posted
Posted

Parts include:

Rb25de non vct head from a R32. Head has been cleaned, new valve stem seals, heavy duty springs for turbo application and surface machined flat.

Inlet manifold, injectors and fuel rail, Coil packs, throttle body and all bolts/miscelanious pipes etc.

Series 2 RB30 block, requires maching bore/hone etc. Crankshaft also requires machining. Standard rods & all bolts required for assembly.

New ACL cast RB30 pistons, rings and bearings. Pistons are 1mm oversize and bearings .25mm oversize.

RB30 complete engine gasket kit with Headgasket.

Pistons are for a RB30 non turbo, so when assembled with RB25DE head will give compression ratio of around 8.3-1

As stated the block will need to be bored 1mm oversize to accomodate the pistons and the crankshaft ground .25mm for the bearings. This is a complete package and once assembled will handle up to 350rwkw. Was planning to assemble this engine and put in my R32 although being a full time student i just dont have the cash.

Price $1500 for the lot. Contact through PM or call on [removed by admin at OP's request].

Pictures : http://s160.photobucket.com/albums/t177/Shano3000/

Link to comment
https://www.sau.com.au/forums/topic/258880-rb2530-engine-package/
Share on other sites
Shano3000 Proficient

Shano3000

Posted
  • Author
Posted
are the pistons going to suit a twin cam head?

Taken from original post: Pistons are for a RB30 non turbo, so when assembled with RB25DE head will give compression ratio of around 8.3-1

Drift Freak Collaborator

Drift Freak

Posted
Posted
Parts include:

Rb25de non vct head from a R32. Head has been cleaned, new valve stem seals, heavy duty springs for turbo application and surface machined flat.

Inlet manifold, injectors and fuel rail, Coil packs, throttle body and all bolts/miscelanious pipes etc.

Series 2 RB30 block, requires maching bore/hone etc. Crankshaft also requires machining. Standard rods & all bolts required for assembly.

New ACL cast RB30 pistons, rings and bearings. Pistons are 1mm oversize and bearings .25mm oversize.

RB30 complete engine gasket kit with Headgasket.

Pistons are for a RB30 non turbo, so when assembled with RB25DE head will give compression ratio of around 8.3-1

As stated the block will need to be bored 1mm oversize to accomodate the pistons and the crankshaft ground .25mm for the bearings. This is a complete package and once assembled will handle up to 350rwkw. Was planning to assemble this engine and put in my R32 although being a full time student i just dont have the cash.

Price $1500 for the lot. Contact through PM or call on [removed by admin at OP's request].

Pictures : http://s160.photobucket.com/albums/t177/Shano3000/



Mate where are you located??
  • 2 weeks later...
Shano3000 Proficient

Shano3000

Posted
  • Author
Posted
I'd take it off you, except i am in the NT, postage is a killer

Hey, i had the head with all accesories delivered to me from qld for $100. So if you like i could seperate the package and you just source your own RB30 block/crank. PM me if interested.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Will have a look at that. I cant see any leaks 
    • GTSBoy
      Coolant leak?

      By GTSBoy · Posted

      Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Songo
      New kid on the block

      By Songo · Posted

      Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...