Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

ohk well i have a z32 AFM chillin' in my room, however bigger injectors + ecu = $$$ fml

alright well i guess ill give old dan a bell and hold my ankles

ohk well i have a z32 AFM chillin' in my room, however bigger injectors + ecu = $$$ fml

alright well i guess ill give old dan a bell and hold my ankles

what ecu does it have now?

And a noun. And a prefix.

Is it in the dictionary yet?

ohk well i have a z32 AFM chillin' in my room, however bigger injectors + ecu = $$ fml

alright well i guess ill give old dan a bell and hold my ankles

pain mang. Can you use second hand gtr injectors? that would probably save some money.

Is it in the dictionary yet?

pain mang. Can you use second hand gtr injectors? that would probably save some money.

nah, stock sr ones are almost the same size as gtr anyway! s14 are 440cc and s15 jdm are 480cc

the ecu, which was thought to be stock - turned out to be an aftermarket one of some sort, a japanese dr drift sort of thing - im not sure on its maps etc

the ecu, which was thought to be stock - turned out to be an aftermarket one of some sort, a japanese dr drift sort of thing - im not sure on its maps etc

Well in that case i wouls assume that tuning is more than likely the culprit, I thought you had it tuned already when i gave my other suggestions, first port of call tuning, injectors to small ect can be tuned around, but i would be concerned for my engine running unknow tuning and experiencing hesitation, what was the cause of the last failure? The ecu could have had somthing to do with that engine dying too

yeh - the guys who sorted out the timing discovered the ecu. the dyno run to sort out timing was included when i bought the new motor - so no "tuning" went on

alright well ill turn the boost down in the mean time and try and get it on the dyno

yeh - the guys who sorted out the timing discovered the ecu. the dyno run to sort out timing was included when i bought the new motor - so no "tuning" went on

alright well ill turn the boost down in the mean time and try and get it on the dyno

sounds like a solid plan!

Might as well chuck on the z32 (just)before the tune too

PS! JOHN!

did i see you post a link to "secretdick" on the last page?!?!

WOOOAH

you've changed man, but im not complaining ;)

Indeed. I'm like an epic classifieds lurker these days :)

Or a pimp 33 4 door...

mmmmmmm rolling sechs

Tristan you should talk to Dan at ERD, he is pretty sick at over the phone diagnostics, just dont take too much of his time cause i want him to finish my engine :P

I really have to remember to call him about an attesa filter one of these days

someone just replied saying AFR should be checked out and therefore needs dyno time

he also said 1 bar is too high on stock injectors/afm

ugh GAY

Thought you had a Z32 AFM? That'll easily hold 1 bar mang

He has some experience with SR's, he is the RB guru but very good with SR's too

but if he suspects it is sensor or elec problems he will likely send you to EFI, which will make you cry, because they have an ocilliscope and he doesnt

Going to EFI would even make baby Jesus cry

the ecu, which was thought to be stock - turned out to be an aftermarket one of some sort, a japanese dr drift sort of thing - im not sure on its maps etc

Oh, I have a "thought to be stock" car too, but it just keep throwing me goodies and surprises! I want to check my ecu, and do a dyno run. Just to see what's really inside it.

ah the joys of my car :(

+1 for every other bastard in this thread

ohk well i have a z32 AFM chillin' in my room, however bigger injectors + ecu = $$$ fml

alright well i guess ill give old dan a bell and hold my ankles

This 'splains Z32ness

yeah... in your room will help. Now you can run like 2 bar through your desk. Win.

Put it in the damn car and get it tuned :)

PS don't remember seeing it - but did anyone say fuel pump? Is that still an old one? Or has it been replaced?

PPS there was like... one whole page just about dongs. Not a bad whoring effort, I must say.

yeeh john i have a z32, but i didnt fit it up - guess now im going to have to hahaha

joy!

Fit it and run it and see how it goes. Might go ok, might drive like a bag of shit and need a tune, but you might be lucky and it'll just run.

yeh bad idea - itll run like a total ballsack ive read

and yeeh i have a new fuel pump

and yeh my desk runs wicked boost and flutterz hektikly :)

aww really? :) that sucks. I was hoping he might fluke it

It *MIGHT* be OK for just babying it around for a bit, although its highly unlikely.

Is DEFINITELY a bad idea for driving it hard/pinging of limiter for drift. The mixtures are going to be wrong, and most likely they will be lean. Turbo engine + lean = splode

It *MIGHT* be OK for just babying it around for a bit, although its highly unlikely.

Is DEFINITELY a bad idea for driving it hard/pinging of limiter for drift. The mixtures are going to be wrong, and most likely they will be lean. Turbo engine + lean = splode

hmm... this is very true.

damn... well... get it fitted and tuned son!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...