Jump to content
SAU Community

Recommended Posts

Alright, garage cleanout time, this is what is still for sale.

Misc:

- FD3S RX7 RS - R Standard springs and shocks (all four corners) - $300

S13 Silvia Parts / 180SX Type X parts:

- 6 alloy rims - $400

2 x Work 5 spokes 15x6.5, 4 x 114.3

31032009229.jpg

4 x Mullins 5 spokes 15x6, 4 x 114.3

31032009230.jpg

Tyres are reasonable, consider them drift rims.

- Silvia Taillights x 2 - $50

- Standard Side Mount Intercooler - $80

- Front Sway Bar + Link rods - $60

- Standard Tension Rods - $50 pair

- Super Hicas - working fine - $70

- Type X bonnet, silver, as new - $250

- Standard Diff Centre - $90

- Leather Type X air bag steering wheel - $250

- Whiteline quick release front strut bar - $150

- VARIS Carbon Fibre rear diffuser - $500

(pictures below, the actual diffuser fitted to a friends old car)

DSC02706.jpg

DSC02707.jpg

DSC02708.jpg

R33 GTR Vspec parts for sale:

- std front GTR sway bar - $50

no link rods

img1114dy0.jpg

- std computer - $200

img1111gq1.jpg

- std centre guage cluster - $120

img1113zh3.jpg

- std springs and shock assembly (all four corners) - $250

shocks have been rebuilt, very good condition

img1119ea2.jpg

- aftermarket front pipe for twin turbo setup - $150

img1110qe6.jpg

Small Damaged Area on Front pipe:

img1112af0.jpg

Parts are located in Sydney, pickup only!

PM me for contact details!

Link to comment
https://www.sau.com.au/forums/topic/263661-r33gtr-s13-fd3s/
Share on other sites

  • 1 month later...

Bringing this back up,

Note would trade parts (& cash where needed) for other parts of interest that I need;

- R33 GTST brakes + S13 5 stud conversion gear (either aftermaket hubs or S14 gear)

May also consider S15 / Z32 front Callipers

- Set of Work Emotion XD9's (Gunmetal preferred) in

2 rims x 17 X 8.5, 5-114.3 / +25

2 rims x 17 X 9.5, 5-114.3 / +17, or +28

- Rays Lugnuts, 25 x 1.25mm type

- Takata 4 point, 3" harness

- SR20, 740cc Injectors

- SR20, Nistune or PowerFC ecu's

- Z32 afm

- Oil Cooler setup for SR

- Aftermarket radiator for SR (42mm or larger)

Link to comment
https://www.sau.com.au/forums/topic/263661-r33gtr-s13-fd3s/#findComment-4577163
Share on other sites

Misc:

- FD3S RX7 RS-R Standard springs and shocks (all four corners) - $200

S13 Silvia Parts / 180SX Type X parts:

- 6 alloy rims - $300

2 x Work 5 spokes 15x6.5, 4 x 114.3

4 x Mullins 5 spokes 15x6, 4 x 114.3 (2 spray painted black)

Tyres are reasonable (some good, some below average), consider them drift rims.

- S13 Silvia Taillights x 2 - $50

- S13 Standard Side Mount Intercooler - $80

- S13 Front Sway Bar + Link rods - $60

- S13 Standard Tension Rods - $50 pair

- S13 Super Hicas - working fine - $70

- S13 Standard Diff Centre - $90

- RPS13 Leather Type X air bag steering wheel - $250

- S13 Whiteline quick release front strut bar - $150

- VARIS Carbon Fibre rear diffuser - $450

R33 GTR Vspec parts for sale:

- std front GTR sway bar - $50

no link rods

- std computer - $150

- std centre guage cluster - $100

- std springs and shock assembly (all four corners) - $200

shocks have been rebuilt, very good condition

- aftermarket front pipe for twin turbo setup - $80

Price drops, moving in a few weeks, need this stuff gone!

Note would trade parts (& cash where needed) for other parts of interest that I still need;

- Rays Lugnuts, 25 x 1.25mm type

- Takata 4 point, 3" harness

- Bolt in cage for 180SX

- R33 GTR Passenger seat

- R33 GTR Brembo's (Callipers Only, no pads or rotors)

Also, seeing if I can pre-sell these rims, they will be off the car and available in approximately 3 - 4 weeks at this stage.

Lightweight BBS Rims, 4 x 114.3, all in good condition with BBS center caps and BBS valve covers. One rim has small gutter rash.

Fronts are 17 x 7

Rears are 17 x 8

(offsets coming later tonight)

Tyres fitted at the moment are Falken Azenzis (615s), approximately 3 weeks old, 90% tread remaining. (One tyre has tiny flatspot - slight noisy up to about 55km/h, only going to be noticeable if you run lots of camber).

10032009217.jpg

Asking $2000

Parts are located in Sydney, pickup only!

PM me for contact details!

Link to comment
https://www.sau.com.au/forums/topic/263661-r33gtr-s13-fd3s/#findComment-4589340
Share on other sites

  • 3 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...