Jump to content
SAU Community

Recommended Posts

  • 1 month later...

Thanks B3CKS appreciated!

Life took a sharp detour of late and things just havnt been able to be put together until now. Financially i had to push back fitting the kit but here now it's set to go on.

Next week it goes in for fitting of the kit and paint matching to the existing grey. I was looking to respray but that'll have to wait for now. This sunday i'll get the front bar off and refit the washer bottle before it goes away, and relocate the horns as theyre poorly placed from the FMIC fit up.

In the mean time i've fitted a Greddy BOV to the existing location on the factory crossover pipe. See DIY section if your interested.

post-61816-1249623789_thumb.jpg

Ive fitted the FMIC from just jap (cooling pro type 1 i think) in prep for the kit, but also as a small performance improvement. There's a thread under forced induction section showing the hows, but here's the end result.

post-61816-1249623647_thumb.jpg

post-61816-1249623708_thumb.jpg

Going back a lil further i also had to fit a set of ngk iridiums and jjr coil packs. Running much better now, no complaints for sure.

Link to comment
https://www.sau.com.au/forums/topic/265726-styln/page/2/#findComment-4755096
Share on other sites

Ok some progress pics. The front bar first. It was real bashed around by transport from overseas or wherever it came from. Cracks, chips, n scuffs but none the less intact. I dont think it'll last long at all but we'll see what happens. Here's it fitted up.

post-61816-1250129170_thumb.jpg

post-61816-1250129185_thumb.jpg

post-61816-1250129195_thumb.jpg

The rear bar so far looks too skirty for my liking and really boxed off the ass alot, but until the sideskirts are on im hesitant to judge. I'll give it time once its painted and see how it stays in my eyes, but chances are im going to end up getting it removed and modified to remove the skirt in favour of something a litlle less in ya face.

post-61816-1250129131_thumb.jpg

post-61816-1250129147_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/265726-styln/page/2/#findComment-4765529
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
  • 11 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
×
×
  • Create New...