Jump to content
SAU Community

Recommended Posts

Make : Nissan

Model : Skyline R33 GTST 93

Color : Burgundy

Transmission : 5 Speed Manual

Location : Melbourne

Registration : May 2010

Modifications : Vehicle has been modified and produces 275rwkw on high boost and 239rwkw on low boost. It is a very quick street car and is certainly for the enthusiast who is able to handle a powerful vehicle. I have personally tuned this car myself through a Power FC.

Garrett 3071R turbocharger with a custom split dump into a high flow cat through a Fuhtizhu exhaust.

FMIC

Z32 Air Flow Meter

GTR Fuel Pump

Custom Air Box

Jaycar Boost Controller

Apex Power FC with Hand Controller

Exedy Heavy Duty Clutch

17*9 Volk Rears with 255/40/17 with Falken Azensis tyres

17*8 Volk Fronts with 235/40/17

Autometer NV Boost Guage

Nadi Sports Steering Wheel

GTR Body kit

Tein Sports Suspension

Can ran a 12.1@116mph with a HKS 2535 turbo with 239rwkw. Car is definately quicker with new turbo but hasnt seen the strip. Should run high 11 at 120mph with Slick tyres.

Price $18,900 with RWC

0402910486

post-14092-1242373361_thumb.jpg

post-14092-1242373399_thumb.jpg

post-14092-1242373449_thumb.jpg

post-14092-1242373594_thumb.jpg

post-14092-1242373742_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/270183-r33-gtst-275rwkw-immac-cond/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...
  • 2 weeks later...
  • 4 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...