Jump to content
SAU Community

Recommended Posts

hey guys, was about 12 months ago started looking for a datsun 1600 to build up and et into the scene, have had this one for about 4 months and have decided its not really my thing, gonna get back into drifting again.

Car is currently complete and not missing a thing as far as i know.

Engine bay is being painted this weekend then needs engine and gearbox to be re-installed and THATS IT! will except less as is ( ENGINE bay painted, assembly required) but mostly looking to sell complete and running, rego runs out june 25TH but is roadworthy and engineered for everything in nsw. could supply rego for NEG cost

Looking for $12,000 ONO to get myself a decent modded 180sx and get back into drifting, would also except drift oriented trades.

i have uploaded some pics and provided a link to the build thread of the car.

any info pm me or email [email protected] phone number will be provided for serious enquirys.

Car is located on the mid north coast (1 and half hours north of newcastle)

05032009003.jpg

05032009002.jpg

Photos are of car sitting unwashed and dirty

they were the only photos i was able to link directly to, there are about 100 more in this build thread

http://www.nissansilvia.com/forums/index.p...howtopic=372095

car comes up very clean after a good wash

for interested parties here is a quick run down of mods

ca18det

front mount

alloy rad

microtech

t28bb JDM

r200 lsd

s14 seats

retrimed interior

smoothed engine bay, hidden wiring

recently rewired

speedflow lines and fittings for turbo, fuel system, and catch can

custom alloy catch can and rad over flow

custom fuel rail

mictrotech hand controller

autometer guages

LOTS MORE

Cheers, mitch

Edited by want_33
  • 2 weeks later...

heaps of new pics up on build thread. pretty much sorted now, thanks for interest.

thy guy with the 4 door r32 i havnt got your pm yet and you called on private number, hmb?

cheers

  • 2 weeks later...

interior finished, and engine going in this week, will have fuel system plumbed then off to workshop to plumb up new radiator and intercooler plus piping then its finished.

pm replied to

  • 2 weeks later...

have spoken to you dattow_sb

still up for grabs, went to visit it this morning at workshop and radiator is in, front end almost put back together, just coller and a few other little things and its done.

So offers guys, cash NEG or the right car hit me up

0421605445 Mitch

car will hopefully be finished by end of next weekend :) still for sale and trade

have someone looking at it this weekend, and somebody from qld is keen once its back on the road. so it wont be around for much longer

pm me or 0421605445

the guy who came and looked is very keen, just wating for it to be back on the road next weekend.

am really keen on a 32 four door, or a 180

any offers?

cheers guys, its coming together amazing, will have new pics up tomorrow

  • 4 weeks later...

car is completly finished, pink slipped and registered for 12 months, is also completly engineered.

car absolutly hammers

looking for about $13-15,000 trades or cash monies

very negotiable and a very fair and nice guy so talk to me and see what we can work out

180sx, s14, 32 four door, laurel etc, maybe mx5 and cash my way.

very keen to get into a drifter, possibly a rotory

let me know

0421605445

ar is completly finished, pink slipped and registered for 12 months, is also completly engineered.

car absolutly hammers

looking for about $13-15,000 trades or cash monies

very negotiable and a very fair and nice guy so talk to me and see what we can work out

180sx, s14, 32 four door, laurel etc, maybe mx5 and cash my way.

very keen to get into a drifter, possibly a rotory

let me know

0421605445

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...