Jump to content
SAU Community

Recommended Posts

hey guys, was about 12 months ago started looking for a datsun 1600 to build up and et into the scene, have had this one for about 4 months and have decided its not really my thing, gonna get back into drifting again.

Car is currently complete and not missing a thing as far as i know.

Engine bay is being painted this weekend then needs engine and gearbox to be re-installed and THATS IT! will except less as is ( ENGINE bay painted, assembly required) but mostly looking to sell complete and running, rego runs out june 25TH but is roadworthy and engineered for everything in nsw. could supply rego for NEG cost

Looking for $12,000 ONO to get myself a decent modded 180sx and get back into drifting, would also except drift oriented trades.

i have uploaded some pics and provided a link to the build thread of the car.

any info pm me or email [email protected] phone number will be provided for serious enquirys.

Car is located on the mid north coast (1 and half hours north of newcastle)

05032009003.jpg

05032009002.jpg

Photos are of car sitting unwashed and dirty

they were the only photos i was able to link directly to, there are about 100 more in this build thread

http://www.nissansilvia.com/forums/index.p...howtopic=372095

car comes up very clean after a good wash

for interested parties here is a quick run down of mods

ca18det

front mount

alloy rad

microtech

t28bb JDM

r200 lsd

s14 seats

retrimed interior

smoothed engine bay, hidden wiring

recently rewired

speedflow lines and fittings for turbo, fuel system, and catch can

custom alloy catch can and rad over flow

custom fuel rail

mictrotech hand controller

autometer guages

LOTS MORE

Cheers, mitch

Edited by want_33
  • 2 weeks later...

heaps of new pics up on build thread. pretty much sorted now, thanks for interest.

thy guy with the 4 door r32 i havnt got your pm yet and you called on private number, hmb?

cheers

  • 2 weeks later...

interior finished, and engine going in this week, will have fuel system plumbed then off to workshop to plumb up new radiator and intercooler plus piping then its finished.

pm replied to

  • 2 weeks later...

have spoken to you dattow_sb

still up for grabs, went to visit it this morning at workshop and radiator is in, front end almost put back together, just coller and a few other little things and its done.

So offers guys, cash NEG or the right car hit me up

0421605445 Mitch

car will hopefully be finished by end of next weekend :) still for sale and trade

have someone looking at it this weekend, and somebody from qld is keen once its back on the road. so it wont be around for much longer

pm me or 0421605445

the guy who came and looked is very keen, just wating for it to be back on the road next weekend.

am really keen on a 32 four door, or a 180

any offers?

cheers guys, its coming together amazing, will have new pics up tomorrow

  • 4 weeks later...

car is completly finished, pink slipped and registered for 12 months, is also completly engineered.

car absolutly hammers

looking for about $13-15,000 trades or cash monies

very negotiable and a very fair and nice guy so talk to me and see what we can work out

180sx, s14, 32 four door, laurel etc, maybe mx5 and cash my way.

very keen to get into a drifter, possibly a rotory

let me know

0421605445

ar is completly finished, pink slipped and registered for 12 months, is also completly engineered.

car absolutly hammers

looking for about $13-15,000 trades or cash monies

very negotiable and a very fair and nice guy so talk to me and see what we can work out

180sx, s14, 32 four door, laurel etc, maybe mx5 and cash my way.

very keen to get into a drifter, possibly a rotory

let me know

0421605445

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...