Jump to content
SAU Community

Recommended Posts

hi guys quick question, ive recently OC'ed my comp but havent touched the Vid card, its a 285 nvidia GTX, and ive noticed the temps get pretty dam hot, and slowly climbs the longer i play. also read that they do get pretty hot, but have noticed some slowdown once it gets over 70 degrees core temp.

ive noticed that the fan doesnt seem to change speed, should this be an auto thing as standard?

so what ive done is installed riva tuner (which ive found doesnt work with the new drivers properly yet :blink: )

even adjusting the low and high temps etc in riva doesnt change it, if i do a GPU test on it, the temp goes nuts and the fan doesnt speed up.........using riva manually atm. when i play games i set it to 70-80% fan speed and it keeps the card at a nice even temp with any game. (bout 60 degrees)

any ideas what to do? ive tryed speedfan and Riva, neither regulate the fan ;)

Edited by boiracer
Link to comment
https://www.sau.com.au/forums/topic/276193-285gtx/
Share on other sites

285's get to around 80 degrees on full song from memory which is ok, thats where they sit with the stock cooler

What's your case airflor like? That could be another issue to look at at it does help to have some other air flowing over the card

Link to comment
https://www.sau.com.au/forums/topic/276193-285gtx/#findComment-4675753
Share on other sites

285's get to around 80 degrees on full song from memory which is ok, thats where they sit with the stock cooler

What's your case airflor like? That could be another issue to look at at it does help to have some other air flowing over the card

thnx for the reply,

yeah so ive read, with the 80 degrees, and putting it thru an uber bench test it hits about 80, but when gaming those temps tend to slow it down....just wondering why the fan doesnt do more earlier, seems wierd to me.

airflow is fine, 3 x 120mm filtered fans with nothing to drag the hot air from near the card, if anything the card working hard ups the temp of the CPU a little, but not alot.

PSU is low mount, but in its own compartment, with a fan front and back.

cool, ill stick to leaving it on auto unless i do some uber gaming, othert than that ive found to run it at about 70% fan speed keeps it nice at around 65 degrees playing crysis full detail.

post-62717-1245831689_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/276193-285gtx/#findComment-4676852
Share on other sites

You could always look at upgrading the case fans - just because it has some doesn't mean they are doing a good job :)

I swapped mine out for some Coolermaster ones that move a LOT more air than the standard ones.

I also have some Zalman fan's there that move more air than the coolermaster's for the same level of noise so i might change yet again.

They are all hooked upto a fan controller so when doing nothing, just whiz them down and its almost dead silent

Link to comment
https://www.sau.com.au/forums/topic/276193-285gtx/#findComment-4676903
Share on other sites

speak to your supplier?

Also i would expect the fans to sound a bit more noisy at 80degrees, my card (not a 285) when it hits about 70 - 75 turns its fans on higher automatically but it can take a while for it to kick in for when the fans turn on.

In regards to Riva, yes the most recent drivers brought out by NVIDIA arent usable in Riva Tuner, i just discussed this recently in the PC setup thread.

Long story short i uninstalled the new drivers, found an older driver and now Riva tuner is working sweet. Provided there is a driver approx 3 - 4 months ago for the 285 roll back your driver and then play again with Riva Tuner.

Hope that helps.....

Edited by 25GTT
Link to comment
https://www.sau.com.au/forums/topic/276193-285gtx/#findComment-4677304
Share on other sites

yeah riva is doing it now, i updated cause the latest patch of wow was having issues with the old drivers, runs alot better now.

but silly me didnt reboot the comp after playing with fan speed controllers etc, which it clearly said i should do for changes to take effect, lol.

otherwise yeah, ive got room for another 2 fans in the case, and have been thinking of upgrading them, buit its really only the video card that gets hot, the rest is a E8500 3.16 OCed to 4.19gig, and it runs good temp wise, only gets hot if i give it a good hiding for an hour or more on OCCT, or prime.

so ive figured out now that at 66% duty cycle the vid card sits nicely at 65 degrees while playing WoW (alot of peeps say cause its old you dont need much to run wow, but thats crap if you want full detail and shadows it chews the comp as much as crysis, and played for up to 8 hrs straight) or crysis, so ive got some room to OC the vid card too YAY

thanks again for your replies guys

Link to comment
https://www.sau.com.au/forums/topic/276193-285gtx/#findComment-4679354
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...