Jump to content
SAU Community

Recommended Posts

Hey all. I have a few parts for sale.

Selling a MidnightMods oil cooler. This one in particular however has had hoses custom made to fit in the fender position on a Silvia/Skyline. I have test fitted it but it has never been used. It comes complete with a 13 row thick core, billet alloy relocater and spin on adapter, Speedflow braided lines (Made in AUS), Peramacool (Made in US) thermostat, mounting brackets, fittings, bolts and nuts. In other words, it is a complete kit ready to bolt on. (Like your big name Jap kits) It comes with adapters to suit 3/4 and M20 oil filter mounts and will therefore fit SR, CA, RB aswell as many others.

This kit comes with a thermostat which no other kits in this price range come with. A thermostat is a must for a car that sees any street driving as it allows the oil to warm up as quick as possible. Without a thermostat your oil will take forever to heat up and become fully usable.

It also comes with two ports for gauge sensors. (eg. Oil temp and oil pressure)

Pics:

oilcooler1.jpg

oilcooler2.jpg

oilcooler3.jpg

Everything is in brand new never used condition.

Asking $550.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Also selling a complete rear S14/R33 5 stud conversion with near new bearings. It comes with S14 rear calipers with Bendix Ultimate pads, S14 rotors with splash guards, S14 hand brake cables and R33 hubs which have had the bearings recently replaced. The bearings cost $240 alone! Brakes came off my car so I can confirm they are in good working order.

Basically comes with everything you need to convert your S13 rear to 5 stud. Can supply some R33 knuckles for an extra $50 if you want them.

Pics:

5stud1.jpg

5stud2.jpg

Asking $300.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Don't really have to explain what these are. Got some S14/S15 stock front calipers for sale. They are sprayed in Duli-Color Anodized Blue. Come with 80% QFM pads and all shims, brackets, etc. Were just taken off my car so I can confirm they are in good working order.

If you pick up some 4 stud drilled S14 rotors from MidnightMods then these will bolt straight onto your S13/180SX without the need to go 5 stud!!

(See: http://www.midnightmods.com.au/details.php?id=82)

Pic:

calipers1.jpg

calipers2.jpg

Asking $230.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Lastly, got some stock Series 2 S14 seats for sale. They are in as mint condition as you'll find. Not a single tear or burn on them. Come with rails.

Pic:

seats1.jpg

seats2.jpg

Asking $200.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

All parts are located in South East Melbourne. Will post anything at buyer's expense. If you have any questions feel free to pm me. :iluvff:

  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...