Jump to content
SAU Community

Fs: V35 Fm Expander

siu_loong_bao
 Share

Recommended Posts

siu_loong_bao Rising Star

siu_loong_bao

Posted
Posted

I bought this to install into my V35 Bose unit (only goes to 89.9MHz)....With this unit, it will increase your reception frequency from 88MHz to 108MHz.

But now I have decided remove my whole setup and install a new system (still slowly buying bits and pieces), hence no need for this.

The unit is brand new and I can give you the receipt to show I paid $30 for it. All I want is $30 plus postage (which is about $5 to VIC). Pickup from west side of Melb is also ok. If it doesn't work, you can call the seller (who sold me this) to arrange a replacement for you, since I bought it from a store.

As you can see in the pic, it looks like a simple task. But please note, the unit needs to be attached to the +ve wire. I was intending on attaching it to the cig lighter. If you are not good with wires, get a professional to do it for u. I could do it for you as a favour today (to be repaid later) if you r in the west side of Melb...but no guarantees! LOL...

Unit is made in NZ...

FM001.jpg

FM002.jpg

FM003.jpg

PM me or call me:

0

4

0

3

3

4

7

7

3

9

Link to comment
https://www.sau.com.au/forums/topic/280700-fs-v35-fm-expander/
Share on other sites
xtc Proficient

xtc

Posted
Posted

i have no idea about the fm setup etc but somehow on mine im still able to listen to the main fm channels.

however its 10 down. say i was listening to 92.9 it would be 82.9 or 96fm it would be 86.00? has mine been installed already or is it something else?

Japav Collaborator

Japav

Posted
Posted (edited)

hmm, i might get it~if thats all the part need to get it work and if u can kinda tell me where/how to get in on the car~

coz bought one from bloody jaycar for $50 and been told if need other parts..==

btw....the keyboard language looks like arab!! :P or thia~? :)

Edited by Japav
siu_loong_bao Rising Star

siu_loong_bao

Posted
  • Author
Posted

yeah...Arab....i was in Dubai for 2 years....but i ain't no Arab....:P I luv pork...

xtc - you have one installed....this is what the FM band expander does...so when you are connected to Fox FM (Melb) at 101.9, the stereo will read 91.9....

Japav, as far as I am aware, this is it - nothing else required. This is becos of the Nissan antenna plug. Generic band expanders are like $20 but have a different antenna socket, so I am assuming the Jaycar one is generic + u need to buy the adaptor to convert the antenna socket. It's not a hard job of getting it in....remove centre console, get access to the back of the head unit and plug it in. Then solder/attache the red wire to the cigarette lighter +ve.

if anyone is unsure, I suppose you could ask Chris Rogers....

Japav Collaborator

Japav

Posted
Posted (edited)
yeah...Arab....i was in Dubai for 2 years....but i ain't no Arab.... :P I luv pork...

xtc - you have one installed....this is what the FM band expander does...so when you are connected to Fox FM (Melb) at 101.9, the stereo will read 91.9....

Japav, as far as I am aware, this is it - nothing else required. This is becos of the Nissan antenna plug. Generic band expanders are like $20 but have a different antenna socket, so I am assuming the Jaycar one is generic + u need to buy the adaptor to convert the antenna socket. It's not a hard job of getting it in....remove centre console, get access to the back of the head unit and plug it in. Then solder/attache the red wire to the cigarette lighter +ve.

if anyone is unsure, I suppose you could ask Chris Rogers....

hmm~guess $30 wont hurt my pocket for a trail which could save me hundreds for changing entire unit~

i'll SMS for quicker contact~

damn....just contacted my bro in taiwan...he already picked up one for me and packed into his laggage when he coming in next 2 weeks....soz

BTW, is ur silver or blue sedan shown in the other topic ? Melbourne V35s

Edited by Japav
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...