Jump to content
SAU Community

Recommended Posts

hey guys, been a looong time since ive posted up on here mainly cause i dont live over in Australia. Well ive got an RB25DET NEO in my S chassis "240sx" here in the US, and i am in need of a replacement VCT (variable cam timing) solenoid. right now its leaking oil thru the connector and causing the car to run like crap..These engines were never sold over here so you can imagine trying to source one of these parts is not exactly easy. I would very much appreciate if anyone on here could help me out. i wouldnt even mind getting brand new one from the dealer. If one of you guys could check into that ii would be very greatful. i know im not a very big participant on this forum and for that im sorry, but I am a fellow RB owner and I am in need of some help.

thanks in advance everyone

Mark

Link to comment
https://www.sau.com.au/forums/topic/284158-wtb-vct-solenoid-rb25det-neo/
Share on other sites

afaik r33 ones are the samd just different plugs which are easy to get

thanks for teh quick response, i honestly dont know what the R33 version looks like...would you happen to have a picture of it ? i have seen the VCT solenoid in my car , i have removed and have seen the entire peice without it installed in the engine. if i could see a complete picture of the VCT solenoid without it in the head it would give me a good idea if it will in fact work. not that i dont trust you at all but i have heard thru numerous people that they are in fact different. i just would like to be sure is all.

thanks for teh quick response, i honestly dont know what the R33 version looks like...would you happen to have a picture of it ? i have seen the VCT solenoid in my car , i have removed and have seen the entire peice without it installed in the engine. if i could see a complete picture of the VCT solenoid without it in the head it would give me a good idea if it will in fact work. not that i dont trust you at all but i have heard thru numerous people that they are in fact different. i just would like to be sure is all.

anybody?!?!

anybody?!?!

well thanks anyways guys, i had a buddy in japan actually pic me one up from a wrecked ER34. and at the same time i found the actual part number converted to a US nissan part number and i can get me one here in the state for around 100.00 bucks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...