Jump to content
SAU Community

Recommended Posts

Got a few things for sale due to upgrades.

All parts off a 95 R33 GTR, 80,000kms.

Located in Hope Valley 5090, Adelaide.

Willing to Post at buyer's expense.

Stock Turbos with actuators (14411-24U04). No shaft play, excellent condition for their age!

$350 for the pair. Firm.

16469_186342291187_663326187_3152815_697663_n.jpg16469_186342301187_663326187_3152816_4684135_n.jpg

16469_186342306187_663326187_3152817_6854463_n.jpg

Stock Dump Pipes with shields:

$50 o.n.o

16469_186342286187_663326187_3152814_4220870_n.jpg

K&N panel filter, 15,000kms Old - great upgrade. (remember these are cleanable!)

$20 o.n.o

16469_186342281187_663326187_3152813_5259247_n.jpg

Stock Cam Gears

$50 o.n.o

16469_186342276187_663326187_3152812_2211419_n.jpg

R33 Horns - freshly painted black

$20 o.n.o

16469_186342316187_663326187_3152819_4792029_n.jpg16469_186342311187_663326187_3152818_6671071_n.jpg

R33 Alloy Catch can/washer bottle all in one

Bolts in where the washer bottle goes!

Unfortunately it is missing the cap, which can easily be replaced with a mini-breather or similar.

RRP is $280.

$150 outright

or

$100 exchange for a stock 1995 GTR washer bottle

16469_186345056187_663326187_3152823_6074255_n.jpg

Thanks for your time,

Nigel.

Edited by BIT SUS
Link to comment
https://www.sau.com.au/forums/topic/298677-r33-gtr-parts-adelaide/
Share on other sites

Horns sold.

Catch can for sale only, no exchange

want this gone! I'll rip it out this week, give it a good polish and post up some better photos!

Edited by BIT SUS
Hey mate, couple of questions, would u sell a turbo seperate? and will it fit onto an a31 cefiro? might be interested

would prefer to sell as a pair, and I have no idea if it will fit a A31 sorry mate.

yeah sorry im a noob didnt know i needed ten posts to pm other members

whats ur number? ill call to arrange pick up cheers

pick up for what? what are you buying? :)

pm sent

  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
    • Hi all,I already introduced myself in the Victoria section, but only saw this section now lol XD New to forums and new to skylines. Hoping to buy my new skyline within October
×
×
  • Create New...