Jump to content
SAU Community

R32/r33-rb20/rb25 2.5" Turbo Dump Pipe "screamer" + Hid Kit

MegaGTS4
 Share

Recommended Posts

MegaGTS4 Proficient

MegaGTS4

Posted
Posted

AM performance made Dump pipe

I PURCHASED THIS CUSTOM DUMP PIPE NEW AND HAVEN'T USED IT AND THERE FOR CANT VOUCH FOR FITMENT BUT IT IS STILL BRAND NEW

NISSAN SKYLINE R32/R33-RB20/RB25 2.5" STAINLESS STEEL TURBO DUMP PIPE "SCREAMER" DIRECT BOLT ON TO THE STOCK TURBO.

NOTE THIS PIPE IS FOR RACE USE ONLY (STREET USE IS FOR YOUR OWN DISCRETION)

THESE TURBO DUMP SCREAMER PIPES ARE SPECIALLY DESIGNED WITH A CIRCULAR DIVIDER AND GIVE A PERFECT SEAL AS THEY PRESS FIT INTO THE REAR OF THE TURBO MAKING SURE THERE IS NO CONFLICTING OF EXHAUST GASES FROM TURBO EXHAUST CHAMBER TO WASTEGATE OUTLET.

Wastegate pipe is 1 1/2 pipe

Dump pipe exit is 2 1/2 pipe

Price is $280 delivered for Screamer pipe

Also I have a New HID kit for H3c cars that I probably wont use, also brand new so once again cant state on quality of fitment and legality

Price is $150 Delivered for the HID kit

Contact me Via PM

I have some used JIC Magic camber top arms to suit R32 for wild 2 deg neg camber (non adjustable), perfect for that drift R32, $50 plus postage negotiable

post-857-1260715646_thumb.jpg

post-857-1260715724_thumb.jpg

post-857-1260715794_thumb.jpg

post-857-1260716494_thumb.jpg

MegaGTS4 Proficient

MegaGTS4

Posted
  • Author
Posted

Here is the Pic of the JIC arms, the black ones are standard R32 GTS-T arms so u get the idea how much these will give u negative camber for the track/drift car, these have been sitting in a box since 2001 and seem to be still in good condition

post-857-1260779309_thumb.jpg

  • 1 month later...
  • 3 weeks later...
  • 5 months later...
Notorius Collaborator

Notorius

Posted
Posted (edited)

hi just wondering if the screamer is still forsale?? if so could you email me [email protected] or call on 0450232544. thanx

Edited by Notorius

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...