Jump to content
SAU Community

Recommended Posts

hey guys

so im trying to hook up a couple of blue led strips (from jaycar) to the dome light of my r32 sedan.

ive got a switch, fuse and everything to do it

im hooking them up to my headlights (already done), a kill switch (done) and the dome light so when the doors are opened they will come on

anyways, anyone know what wire to tape to get it to come on while door is open (preferably without ripping out the roof lining) ??

ive found the wire going from the door switch (a red one with a black stripe)

but it is opposite to what i want, when doors shut it comes on and door closed its off

arrr its soo frustrating ...

anyone got some answers or ideas ??

cheers

troy

Link to comment
https://www.sau.com.au/forums/topic/303614-need-help-with-leds-in-footwell/
Share on other sites

tried it

its a reverse switch

so i tapped that wire and it works opposite to how i want

when doors closed the wires live and when the doors open the wires not

so im going to try tapping the red and white wire in the front pillar

if it doesnt work then ill report back haha

thanks for trying but mate

EDIT: tried taping the front pillar but no luck :P still going by the opposite. anyone know how this circuit acctually works ??

Edited by aussietroy

Hey matey, i have done similar to what you want to do. I have white LED stripes attached to the underside of my door, that turn on and off with the door opening and closing. I would recomend trying to attach them to the light around the ignition barrel, as that is where i attached mine and i have not had any dramas.

draw a diagram of what you have tried..

since from a normally -ve switch system you connect a test light to it, it will light up when you earth the earth switch trigger wire to earth as it completes the circuit

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi Everyone, I did 4.11 gears in my 34 GTR and only thing that remains is to fix the speedo reading (it reads about 15% higher) using the R33 GTR speedo sensor. Few questions:   1. Does the R33 speedo sensor fit right in to the 6sp getrag? I read it does but wanted to confirm because the speedo sensors between 33 and 34 look quite different   2. The connector on the 33 speedo sensor will not plug into the connector on the getrag. Do I just need to wire the pins together manually?  See pic: https://imgur.com/a/NTDzFe8
    • Does anyone know how I could find the part number for bolts used with  r34 with rb25detneo engine lower timing belt cover?   my timing cover was rubbed and i fixed it but upon putting the harmonic balancer i see the timing cover is almost rubbing and that is due to previous owners using general bolts and washer rather than the bolts per link below which sits inside the washer and pull the cover in   not sure if those bolts will fit rb25   https://www.ebay.co.uk/itm/326510870741?gad_source=1&gbraid=0AAAAAB_7XZxjuciMybdVOTShCs9857686&mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338723872&toolid=20006&customid=7jIl12glAAAAVfHSSnyxAmSsdRxnAAAAAA
    • If the slightly higher internal EGR caused by a high flow cat causes detonation your tuner was way, way, way too aggressive to begin with. Timing scatter is a problem unless you go to a crank trigger, winter vs summer blend has different octane, list goes on.
    • The H1 Alpha with the 6.6 Duramax is basically the actual powerplant it needs to be remotely ok to drive on public roads. It's just not worth the cost to buy a real one. Humvees look cool but man the reality of them is depressing. Grunts aren't kind to them but they aren't that reliable either, they have horrible payload despite absolutely massive size, zero actual armor against mines/small arms, absolutely anemic naturally aspirated diesels, list goes on. 
×
×
  • Create New...