Jump to content
SAU Community

Recommended Posts

One of the largest eyewear frames ever made by Oakley, it’s a perfect match for Ducati’s lineage of aggressive design. Signed by the logo found on some of the world’s fastest motorcycles, these sunglasses combine pure PLUTONITE® lens material with the unbeatable performance of Oakley’s HIGH DEFINITION OPTICS® (HDO®). Patented technologies maintain clarity at all angles of vision, even at the sides of lens contours that extend peripheral view. The frame is digitally sculptured from lightweight O MATTER® and authenticated with true metal icons in Ducati red.

  • Extended wrapped frame geometry to fit medium to large faces
  • Lightweight, stress resistant O MATTER® frame material
  • True metal icon accents
  • Sculpturally integrated hinge mechanisms
  • 8.75 base lens curvature, increased lens area, wrap and rake for enhanced peripheral coverage
  • PLUTONITE® lenses to block 100% of all UVA, UVB, UVC and harmful blue light
  • IRIDIUM® coatings and lens tints to reduce glare and heighten contrast
  • XYZ OPTICS® for maximized clarity at all angles of vision, even at lens periphery
  • Exceeds ANSI Z87.1 standards for impact and optical requirements
  • Prescription range available + 2.00 to -3.00 with cylinders up to -3.00 and a minimum PD of 60 mm

Limited edition. Mint condition. Still in original box. Only a few weeks old. Not needing them anymore.

RRP is $199. Asking $180 ono

Located in Morayfield, Qld.

Pickup is preferred. Interstate buyers welcome but will have to pay postage and insurance.

Cheers!

post-62518-1264906774_thumb.jpg

post-62518-1264906837_thumb.jpg

post-62518-1264906867_thumb.jpg

post-62518-1264906915_thumb.jpg

  • 2 weeks later...
  • 4 weeks later...
  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Last week for these to sell as i will take them off and advertise elsewhere. so send me your prices before they're gone.

only genuine offers please.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...