Jump to content
SAU Community

Apexi exhaust valve controller

butthead

By butthead,
in General Automotive Discussion

 Share

Recommended Posts

butthead Collaborator

butthead

Posted
Posted

Allo Allo

I've just finished installing the exhaust valve controller & it works perfectly, when its fully closed it sounds stock & when its fully opened there is no loss of performance, best thing i've put on my car.

Someone said they only make them for a 2 1/2 inch exhaust, not true they make em for any size.

I got it through Neugen, he was a pleasure to deal with, it took approx 10 days to recieve it & he was $50 to $60 cheaper than Greenline or anyone else.

Link to comment
https://www.sau.com.au/forums/topic/30699-apexi-exhaust-valve-controller/
Share on other sites
butthead Collaborator

butthead

Posted
  • Author
Posted

Yes its the butterfly valve from inside the cabin job.

It cost me $202 postage included from Neugen & its easy to install. I havent got a camera to take photos of it, take my word for it, its tidy & neat.

The cable went down through the passengers seat, there's a wire going to my cat so i threaded it through there, no drilling needed

butthead Collaborator

butthead

Posted
  • Author
Posted

Yes Nengen & the butterfly valve goes just after ur cat & the controller i've mounted it to the left of my left knee on the centre console, its out of the way it doesnt interfere with anything. The controller is only small.

butthead Collaborator

butthead

Posted
  • Author
Posted

I mounted mine on the inside of the passenger footwell (next to the stereo) so still very well in reach of my left hand but not so annoying as to hit my left knee on it every time you change gears ....

Thats exactly where i've put mine. Just didnt explain myself properly

JiMb0 Veteran

JiMb0

Posted
Posted
Thats exactly where i've put mine. Just didnt explain myself properly

Koolies :) it's a good spot cept every new passenger to the car gives in to the urge to play with it ;)

I actually removed the valve recently as I started getting scared when it was closed ... backpressure and turbo's dont mix well :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ToothDR32
      $5 Clock upgrade for R32 GTR

      By ToothDR32 · Posted

      Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
×
×
  • Create New...