Jump to content
SAU Community

Recommended Posts

New thread as old was clustered and outdated! need these gone

R32 Whiteline strut brace New $80

pic 1

pic 2

Blitz SBC Spec R $280

Bought second hand off ebay to fit onto my skyline, never got around to it now im selling the car. Item is second hand with slight blemishes. There is glue on the case from where it was mounted onto the dash. This should come off with some heat and patience. I never fitted it so don't know how to install or configure please do not ask, but im pretty sure there are intruction manuals on the internet. Comes with all that is displayed in the pictures and should be everything you need.

Freatures:

* The Blitz Dual Solenoid Boost Controller R (Dual SBC Spec R) has four programmable boost settings or various levels of boost.

* This unit features a built-in boost gauge, peak boost display, four different boost settings, boost warning, scramble boost, and a boost limiter safety feature to prevent over-boosting.

* The Dual SBC Spec R uses a dual solenoid design for maximum boost response, capable of handling boost up to 2.5 bar (36 psi).

* The Dual SBC Spec R is 1/4 Din size and is compatible with internal actuators and external waste-gates.

Pic 1

pic 2

pic 3

R32 Rear pods $40

Maroon in colour. Been in storage. One has a large crack as can be seen pics. Few scratches and scuff marks. The price reflects this.

Would suit repair and respray

pic 1

pic 2

pic 3

R32 Greenlabel AFM $30

Used, was working fine when last removed. Has been in storage for past year.

Cannot gurantee it works 100% but again it was working when last used. This is why its going cheap.

pic 1

pic 2

R32 stock rubber intake pipe $30

Pic 1

Brand new Bosch R32/R33 Starter motor $80

pic 1

Pic 2

Pic 3

All items located in NSW Liverpool area and can post all at buyers expense. Want this stuff gone guys its just sitting around! Everything dirt cheap

New thread as old was clustered and outdated! need these gone

R32 Rear pods $40

Maroon in colour. Been in storage. One has a large crack as can be seen pics. Few scratches and scuff marks. The price reflects this.

Would suit repair and respray

pic 1

pic 2

pic 3

R32 Greenlabel AFM $30

Used, was working fine when last removed. Has been in storage for past year.

Cannot gurantee it works 100% but again it was working when last used. This is why its going cheap.

pic 1

pic 2

R32 stock rubber intake pipe $30

Pic 1

I Will take the rear pods AFM and intake pipe if ypu will post to adelaide

Cheers Scott

hey bud im kinnda new to this

im not sure if its better if i can get a contact number and we can discuss

pick up its not sold yet cheers

  • 2 weeks later...
  • 2 weeks later...
  • 3 months later...
Blitz EBC back up for sale due to times wasters. Want a quick sale grab a bargin!

Is the Blitz EBC still for sale?

Im interested?

location in sydney?

Edited by Jamo30

Hi Dave. Did you end up selling the "blitz boost controller"? If not what do you want for it? I`m in Melbourne so i`d want it sent down, so give me a price delivered.

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Was that with the cas upside or correct way up?
    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
×
×
  • Create New...