Jump to content
SAU Community

Recommended Posts

Black 5 spokes off my girlfriends R33. Dont ask me about the offset cause I wouldn't know. They were purchased from the tyre factory about 18 months ago to suit a R33 GTS-T. Originally cost $2k.

Now the wheels need love. There is a bit of gutter rash on each rim and 1 ding (See Pics) and the black paint has faded and will definetly need to be repainted.

Because of this im selling them for $600

One positive is that the tyres were replaced about 3 months before the motor packed up and still have plenty of tread. They are not a notable brand but judging by the tread formation i'd say there a copy of one of the top brands. They cost $200 each.

Due to the fact that my gf doesn't do burnouts all 4 tyres are good.

Nuts are not included.

Please note the pic of the car looking clean is just so u get an idea of how they can look.

235 wide 35 profile R19

David

0419 003 069

post-54165-1274862587_thumb.jpg

post-54165-1274862715_thumb.jpg

post-54165-1274862911_thumb.jpg

post-54165-1274862998_thumb.jpg

post-54165-1274863036_thumb.jpg

post-54165-1274863075_thumb.jpg

post-54165-1274863109_thumb.jpg

post-54165-1274864299_thumb.jpg

post-54165-1274864348_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/322279-19-rims-with-beefy-tread/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...