Jump to content
SAU Community

Recommended Posts

located in adelaide hills

SR/rb25 GEARBOX!!!

rb25 gearbox, perfect nick, bellhousing has been modified to suit an sr20 motor

will include r33 tailshaft

$2500ono

RB25det s1 motor

excellent cond.

110k km, had major service ect.

inc injector loom and all bolt ons.

NO TURBO, ignitor or engine mounts

comes with a near new clutch

$1500ono

rb25motor.jpg

HKS 2530

excellent condition

its the garett version so its alot newer than all the discontinued hks ones out there.

vertually no shaft play!

braided oil line and various fittings inc.

$1500ono

R33 cusco zero1 coilovers

excellend cond

10k km old

no leaks or knocks, just dusty look very new

damper and 2 way height adjustable

8/6 spring rate

$1250ono

cuscor331.jpg

cuscor334.jpg

R33 Gtst brake calipers

painted red because red things go fast :-)

excellent cond

$400ono

WEDS SA90

jap lightweight wheels

will come with roadworthy tyres

near mint, one wheel has about 3cm of light rash

5 stud17x8&9 + 35

1250ono

30164_417516661003_616551003_515357.jpg

s13 rear camber arms.

gold in colour.

good nick, no play in bearings, threads all good.

dont think they there jap but still way better than isc type ones with welded rose joints (yuk)

have one piece rose joint/ threads (no welds)

look good quality

$180ono

S13 HKS HYPERMAX peformer coilovers

30 way damper and 2 way height adjustable

7/5 spring rate

pillow ball tops

no leaks, havent tested for knocks, they shouldnt knock.

two front top hats arent amazing (rust on top of top hats and pillowballs are starting to loosen which may cause knocking soon, top hats are easily replacable)

all the struts and springs and in great nick, no leaks or seizing ect

good nick

$1100ono

hkscoilovers1-1.jpg

r33 trims

2 door stuff

both door trims

A piller and B piller trims, all with buttons, plugs, ect

$50 or gets thrown on the next bomb fire

r32 stockies

painted matt black

bit of rash

all have about 50% top of the range tread (re01r and the others are good ones to but ive forgotten for now)

$150

pm me for more photos, ill try and add a couple over the next couple days but dont want to clog the thread up.

  • 2 weeks later...
  • 2 weeks later...
hey mate can you pm me with pics of the bell housing and how it was modified?

cheers lev

ill pm u in a second..

coilovers sold, have r33 parcel shelf and all trims

ill pm u in a second..

coilovers sold, have r33 parcel shelf and all trims

hey. im interested in the hks 25/30

send me a text message on 0412949640

if it is still for sale

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...