Jump to content
SAU Community

Nissan 180sx Ca18det Euro Import, Sydney Nsw

Yip
 Share

Recommended Posts

Yip Apprentice

Yip

Posted
Posted (edited)

For sale: Nissan 180sx 1992 European Import

Location: Sydney, NSW

Asking Price: $8000 ONO

Killometer's: Around 73,000

Manual or Automatic transmission: Manual

Engine Type: CA18DET

Condition: No rust, one or two parking dings here or there from previous owner, nothing too major, will post pics tomoz. Chassis is straight, doesnt look like it has ever been involved in any accidents. Red factory paint in good nick. In the third photo along you can see on the left hand rear quarter above the wheel the small ding i was talking about.

Modifications: Nismo cat back exhaust, pod filter, tein coilovers, urethane cradle lock bushes, bride zeta bucket seat (red), full type x interior, sparco wheel, turbo timer, drifteks 17x8 front and 17x9 rear, new rubber at rear and type x tail lights. Will post more up if i remember anything else. Standard LSD. Pioneer head unit with ipod connect, 2 front speakers.

Registration: Mid November

Crash History: None in my ownership, judging by the chassis etc underneath nothing major ever.

Other Comment's about the vehicle: Got a short shift kit for it from the previous owner, has never been installed, also standard lights and some other junk like that.

Reason for selling is money, uni is making it hard to work so i need a cheaper daily.

Has never been to the track, took it to WSID once, cant remeber times, trap speed was just under 150km/h i think.

Would make a good project car or daily, in better nick then most 180's which is why i bought it in the first place.

Contact: Tim 0433046780

100fujidscf7200dscf7200.th.jpg

100fujidscf7199dscf7199.th.jpg

100fujidscf7195dscf7195.th.jpg

100fujidscf7184dscf7184.th.jpg

Edited by Yip
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Matt Z
      SAU NSW - Archies Flame Grille Meet & Cruise to Kurnell

      By Matt Z · Posted

      Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • bcozican
      WTAC 2025

      By bcozican · Posted

      i will be there 😁
    • patrickxdf12
      Squeaking clutch/throw out bearing

      By patrickxdf12 · Posted

      Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...