Jump to content
SAU Community

Recommended Posts

Like last Friday/Thursday? Mass amounts of police pulling people over for speeding on Mitchell Freeway after City West before Leederville Traino.

Remember its 80ks until you pass Vincet Street exit. Saw alot of vans and tradies getting tickets.

Seems like they may be doing this on a regular basis so watch out!

Link to comment
https://www.sau.com.au/forums/topic/326264-bikercops-on-the-freeway/
Share on other sites

I got done for 95 in an 80 zone by the exact same thing.. except on the OTHER side of the city. Just after the swan river bridge, they were hiding around a corner just before it turns 100. Damn those sneaky popo :l

At the part of the freeway more people are already traveling closer to 100 than 80, I can't see the reason why it can't just be 100, but that's the reason the cops are there. Revenue, not safety.

yeah, I've seen them there a couple times... usually on a friday morning. about 5 bikes in a row, with one guy with a radar gun. He'll give a wave and point and they will be off, on after the other. I watched them for a bit, while waiting on the thomas st off ramp. It sounds like they have found a great way to make money, other then multinovas :miner:

Better watch my a** then. But so far I found almost everyone would be driving at least 10km/h over at the 80km/h freeway zones so I usually just follow the pack... eehh safety in numbers?

Speaking of which I just went past one of those dual function cameras at Leech/Albany highway, those things looked way different from the regular single red light cameras also i have added an additional warning POI in my GPS :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...