Jump to content
SAU Community

Recommended Posts

Hi People,

All items located in Sydney - Epping.

Post ok if buyer organises OR can deliver certain items

Contact any time -

PM on here

Cris - 0403491735 Call or sms

Adrian - 0413208919 Call or sms

Photos on request - inspection welcome any time!

WE NEED ALL OF THIS GONE! NO REASONABLE OFFER REFUSED!!!

Willing to trade for items of interest including (cash either way depending on item and condition) -

Front facing RB25DET intake manifold.

Bride Seat + Rails.

R32 Half/Full Cage.

Wheels of interest.

Genuine GTR front bar cover.

RB25DE SII

Complete engine in great running cond.

Came off a Stagea.

Comes with manual R33 ser2 ECU.

Comes with front AWD diff - You can change to RWD very easily and sell the FWD diff.

Never skipped a beat, ever.

Only top fluids used.

Regularly serviced.

Did a compression test before removed and showed to be very healthy engine.

$700 ONO

RB20DET Head

Complete head, has a small weld on one side so selling as is for cams, cam gears etc

Must go, need the space!!!!

$150 ONO

R32 GTS4 Front Diff

Comes complete with sump assembly and diff housing.

4:3 ratio!! Perfect for lowering your GTR diff ratio

Working perfect when removed from car.

Barely used as car has been often run in RWD mode.

$500 ONO – MUST GO!!

RB25DET Block

Needs oversized pistons - been bored out

Bores in good condition, no scoring etc.

Comes with everything except pistons.

$100 ONO – NO REASONABLE OFFER REFUSED!

R32 GTS4 Manual Gearbox

Reasonable condition.

Comes complete with transfer case

2nd gear has usual R32 uneasiness to shift into when cold only.

4th gear had a little bit of a crunch when shifting into at high RPM, otherwise fine in normal conditions

$400 ONO

R32 5 Point Roll Cage

Alloy.

Great fit.

Very light

Painted black

$300 ONO

R32 4door aftermarket (fibreglass) rear bar

Unpainted.

Small chip on corner edge near wheel arch.

$200 ONO

R34 Front Cradle + Rack

Very Good condition

Offers

R32 Motorised Lower Lip

Motorised lip that lowers above a certin speed.

Or you can lock it down to make your car look more low, and raise it when need be, driveway, speed bump etc.

Comes with everything you need, motors, lip etc.

Offers - NEEDS TO GO!

HKS Style SSQ BOV

In Fully hektic chrome.

$50 ONO

GTR Fuel Pump

Comes complete with sender and everything. Bolt in job

$75 ONO

GTR R32 Intercooler

Slight damage to a couple of fins

No leaks

Will hold boost no probs

No restriction to airflow

Offers - MUST GO!!!

R33 Airbox

Complete

RB25DET

$200 ONO

GTR R32 front drive shaft - From transfer case to front diff

x2

Worked fine

$50 ONO

Stock GTST Fuel pump

Complete.

Worked fine.

Direct bolt in.

With sender

$20 ONO

Stock Turbo exhaust manifold

$20

Clutch Fan with clutch coupling and R32 fan

Worked fine

$80 ONO

Air Conditioning Compressor

Worked fine

$80 ONO

Space Saver Wheel

Heaps of tread

Un used.

Brand spankers

ANY offer

Alternator

Perfect working condition

$50

Attessa pump

Worked fine.

$50 ONO

R32 GTST/GTS4 fuel tank

+ Tank straps

Been slightly pushed in but NO LEAKS

$20 or a case of beer. - Preferably not a $20 case of beer :blush:

I'm interested in the space saver wheel.... I'll give you $50 for it plus postage.

PM me if you're interested.

Hey Cris

I might ring you about this tomorrow, but do you have your old GTS4 4wd tailshaft? As I assume your running a rwd tailshaft now? I am in dire need of one.

thanks

  • 3 weeks later...
  • 2 weeks later...

hey there i was woundering if u hav any pics of the R32 Motorised Lower Lip at all and how much would it b to post it to adelaide

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Update: O2 sensor in my downpipe turned out to be faulty when I plugged in to the Haltech software. Was getting a "open circuit" warning. Tons of carbon buildup on it, probably from when I was running rich for a while before getting it corrected. Replaced with new unit and test drove again. The shuffle still happens, albeit far less now. I am not able to replicate it as reliably and it no longer happens at the same RPM levels as before. The only time I was able to hear it was in 5th going uphill and another time in 5th where there was no noticeable incline but applying more throttle first sped it up and then cleared it. Then once in 4th when I slightly lifted the throttle going over a bump but cleared right after. My understanding is that with the O2 sensor out, the ECU relies entirely on the MAP tune and isn't able to make its small adjustments based on the sensors reading. All in all, a big improvement, though not the silver bullet. Will try validating the actuators are set up correctly, and potentially setting up shop time to tune the boost controller on closed loop rather than the open loop it is set to now. Think if it's set up on closed loop to take the O2 reading, that should deal with these last bits. Will try to update again as I go. 
    • More so GReddy oil relocation kits, sandwich plates, etc. all use 10AN fittings. And same, I've only used 10AN and my car sees track work (circuit, doing laps, not 10 sec squirt business).
    • street use or race track, what hose size and why? what factors change with the hose size options ?   see most comon is an10. when you see most oem external coolers are closer to an12? does high volume oil pump like nitto need an12 or 10 be just fine
    • The rod I was moving left and right you can see looking from the passenger side floor up into the center console.  IMG_8095.mov
×
×
  • Create New...