Jump to content
SAU Community

Looking for partner for rb25det/5spd buy

kudos.motorsports

By kudos.motorsports,
in Queensland

 Share

Recommended Posts

kudos.motorsports Grand Master

kudos.motorsports

Posted
Posted

Hey guy,

I'm after someone that is interested in going 1/2 package wise, in an rb25det/5spd combo. I'm after the 5spd conversion and need someone who needs the engine, loom and ecu. You have the chose of either a series 1 or 2 engine differance in price is only a few hundred.

For the complete package they want $4125 including GTS

$1650 is for the 5spd conversion

$2475 is for the engine, loom and ECU (95,000ks on the clock)

For anyone interested in the engine please ring me on 0401417772 (Andrew) or email me at [email protected]. Looking to buy ASAP and freight is not an option unless you organise it.

Cheers guys,

Sully

kudos.motorsports Grand Master

kudos.motorsports

Posted
  • Author
Posted

Fogot to mention in the top post, but I can also include all my auto gear to go with the engine for an extra $300 (gearbox, x-member, ecu, loom etc) I'll also chuck in a 5L bottle of Castrol Transmax Z ATF ($65 worth).

Sully

kudos.motorsports Grand Master

kudos.motorsports

Posted
  • Author
Posted

Hey mate,

Thanks for the offer dude, but I'm really after the rb25det box. That's a complete conversion for $1650. Flywheel, master/slave cylinder, console, box, tailshaft etc. But the condition of my getting the conversion was selling the engine attached to it. :)

Sully

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • V36
      What accelerator cable can be used with greddy plenum

      By V36 · Posted

      HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • MBS206
      Chris' Toyota Mark ii JZX110

      By MBS206 · Posted

      I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...