Jump to content
SAU Community

Recommended Posts

Hi guys.

Recently blew the bulb in the right-hand side headlight. I've been doing a bit of a search and people have been saying that you have to get 'D2R' headlight bulbs or something?

Can I not just buy the bulbs that they sell down at the local Supercheap or Repco?

Also getting the bulbs in.. Seems quite tricky since I can't really fit my fingers anywhere near the back of the bulb holder. What's the easiest way to replace the bulbs?

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/345092-replacing-headlight-bulbs-r34/
Share on other sites

Remove you battery and you should have plenty of room,

did mine a couple of weeks back,

just unscrew the dust cap and sqeeze the spring clip change it and put everything back.

are you using the factory xenon plugs or normal halogen globes?

try ebay,

i bought a HID kit for mine, both headlights for about $60, so a globe should be next to nothing,

just make sure you get the right globe.

HID globes from auto shops anre upwards from $200 depending on what type of globe

How the heck is there such a massive difference in prices for these? ZXY you said you paid $40, whilst R34Mobster paid $275 for a pair and I paid $308 for ONE! I'll wait till I get it from the shop next monday and will update you guys.

did xspeed sell it to you? If so try and take it back cause they've taken advantage of you. As others have said hop on eBay or find a trader on here you can get 2 for less than 100

Edited by gersfan
How the heck is there such a massive difference in prices for these? ZXY you said you paid $40, whilst R34Mobster paid $275 for a pair and I paid $308 for ONE! I'll wait till I get it from the shop next monday and will update you guys.

you need to do research before paying that type of money. $308 is alot of money for a bulb. If you went to dealers, i doubt it would even have been that much.

  • 2 years later...

pull out one of your current bulbs and have a look. on it you should see some code/model number, and some of that should contain "D2R" if you're lucky. If so, then yeah it's the right bulb you linked on ebay. if you're not sure then chuck up a pic for us here and we can verify for you. also, i should mention that if you want to go the Japanese spec, search up garax HID on ebay, they are great bulbs.

pull out one of your current bulbs and have a look. on it you should see some code/model number, and some of that should contain "D2R" if you're lucky. If so, then yeah it's the right bulb you linked on ebay. if you're not sure then chuck up a pic for us here and we can verify for you. also, i should mention that if you want to go the Japanese spec, search up garax HID on ebay, they are great bulbs.

Ahhh, ok, well just got the car few days ago, so will defs take a pic and put it here so can verify what bulb, just gotta see how I take it out haha xD

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...