Jump to content
SAU Community

Recommended Posts

Blitz SBC iD Electronic Boost Controller SPEC -R (dual solenoid) RRP $799

Click on the link below for more info:

http://www.blitz.com.au/SBCiD.html

http://www.scribd.co...-SBC-I-D-Manual

I've upgraded to an i-color so it's no longer required.

As you can see it's in very good condition, installation should only require some Vac hose & a T piece.

The Manual is included but in JAP so I've included the link above in English.

I also have a Blitz Power Meter RRP $300+ I'll add a photo ASAP

Total value is over $1000 I'm asking

$420 Boost Controller $120 Power Meter

The above prices are for Cash pickup only.

Add $15 for Registered Post

I will accept paypal but will charge 2.5% on top as that's what they charge me.

If you have any questions contact me here or email me at [email protected]

If you want to contact me by phone I prefer you call rather than sending sms as I just don't have time to reply.

Thanks for looking

Brett

post-60944-0-98317700-1304215215_thumb.jpg

Edited by Sydneyactionman

Hi there,

You're asking for $540 for both, I'd like to offer you $440 for both, let me know if you would consider this and I'll arrange for cash to be deposited asap.

I prefer local pick up, but you can also send to VIC 3012.

Thanks.

PS: Tried to PM you but it says you cannot receive PM's. Why is that?

$440 is way to low.

$520 posted registered is my final price.

Not sure why I can't get pm's I'll check my settings.

Hi there,

You're asking for $540 for both, I'd like to offer you $440 for both, let me know if you would consider this and I'll arrange for cash to be deposited asap.

I prefer local pick up, but you can also send to VIC 3012.

Thanks.

PS: Tried to PM you but it says you cannot receive PM's. Why is that?

  • 2 weeks later...

Check my feedback below to see I'm a trustworthy seller.

http://feedback.ebay.com.au/ws/eBayISAPI.dll?ViewFeedback2&userid=sydneyactionman&ftab=FeedbackAsSeller

I've also put the Power Meter on Ebay as I've had no takers here.

Blitz SBC iD Electronic Boost Controller SPEC -R (dual solenoid) RRP $799

Ok $415 Posted Registered.

Check my feedback if you have any doubts.

http://feedback.ebay.com.au/ws/eBayISAPI.dll?ViewFeedback2&userid=sydneyactionman&ftab=FeedbackAsSeller

  • 5 weeks later...
  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...