Jump to content
SAU Community

Recommended Posts

Hi Guys,

My name is Nathan and I'm a 30 yo bloke living in Perth with my missus. I thought I'd drop a few lines to introduce myself so here goes. Most of the time I'm at work making radiators for the mining industry. When I have free time I'm only really doing a few other things. They are; playing guitar and writing songs, playing with our new crazy cat, working on the Skyline, watching dvd's with the missus and playing gt5. Hey its one way I can drive after a few beers :thumbsup:.

So a bit about the car, It has; a manual box, a foam pod filter, catback Kakemoto exhaust, hd organic clutch, hicas lock bar, 600x300x100 bar and plate intercooler 3 inch outlets with 2.5 inch piping, power fc (tuned by me with less than 20 knock), bleed valve for boost control(14psi) and a few aftermarket gauges (narrow afr, boost, digital tacho/shiftlight). Planned mods for now are, plugs that cost more than $4 each, fc datalogit, wideband afr sensor and gauge, afm, injectors, fuel pump, mags for more grip, bigger dump pipe and a hypergear turbo. After a bunch more saving it will get a fully forged bottom end either rb25 stuff or rb30 hybrid, head work including cams etc and a big dirty ball tearing turbo with manifold to suit. I'm going to keep the stock intake manifold cos it is a street car and obviously once things start getting scary the exhaust will be modded as necessary. Some suspension and a brake upgrade will fit in there somewhere too.

So that's about it. Here's a link to my car. :thanks::cheers:

http://www.youtube.c...h?v=zvhEyMZNIs8

Link to comment
https://www.sau.com.au/forums/topic/363224-room42/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Thanks MBS206, i got that PDF but got abit overhelm with all the connections and tracing of wires. I wasn't expecting to plug the dash harness anywhere. i was just going to use my electronics jumper wires to plug into the right pins like ECU power, ecu ground, ignition trigger etc... I do have a few ratchet straps locking it down tight. Fire extinguisher ready and only a small amount of fuel at a time, enough to submerge the pump.
    • Thanks GTSBoy, i will do abit more digging. I am missing a blue relay near the ECU connector... so i will chase that up in the next few days as well  
    • https://yariksteel.ru/manual/R33/Skyline_R33_elektroprovodka.pdf   Page 18 should be what you want for the Dash Cluster wiring. Though, you don't need the dash plugged in to get the motor running. What you want is power as how GTSBoy said. You need to power the ECU. Find in the above link the ECU pin outs (Verify them before just connecting them up from things written on the internet). Find anything needing power, give it power, find anything needing ground, give it ground. Then give the starter motor power through a big cable, and bridge the solenoid on the starter straight to power too.  ECU will be on, and when you give the starter power, it'll spin the starter motor, and it should start. I also hope you have a proper stand, and not just the engine sitting on some wood. You will want it bolted down properly.
    • Hello everyone, I am happy to join you.
    • Whereabouts are you, that looks exactly like Akira's old car....
×
×
  • Create New...