Jump to content
SAU Community

Cruse Tonight! 23/07/11 Palm Beach

johnny443

By johnny443,
in Events Archive

 Share

Recommended Posts

johnny443 Collaborator

johnny443

Posted
Posted

hi guys there is a cruse i am trying to organize tonight may not be a huge turnout due to the late notice

Where: Palm Beach

When: meet around 7:30 pm for a 8:00 pm departure if you are going to run late please post up here as i will be checking it but we wont be waiting around long

Weather: If the weather stays good then we will go but if it starts bucketing down i may cancel it (palm beach is a great place to take some photo's and hang out ) but if it rains there is no point

check back if i don't chance it by 6pm then its on !

Route: i will explain before we leave the meet point the route it is quite straight forward (IF YOU ARE CROSSING BACK OVER THE BRIDGE PLEASE BRING YOUR E tag alternative you can go Anzac bridge to avoid the toll)

MEET: at foreshore road Boat ramp as you come out of the airport tunnel and keep to the left take the foreshore road exit and make a right hand turn at the set of lights half way down i will post up a map to get there !

http://www.whereis.c...=D81B250BCC5552

IF anyone has any problems getting to the meet point feel free to call me on 0403569075 (JOHN)

IF ive missed anything please ask will be checking back often

Link to comment
https://www.sau.com.au/forums/topic/371811-cruse-tonight-230711-palm-beach/
Share on other sites
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • oHBoy.
      Starter motor replacment teeth count.

      By oHBoy. · Posted

      Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • niZmO_Man
      J50 clock date suddenly reset to January 1

      By niZmO_Man · Posted

      Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • niZmO_Man
      Wheel Sizes & Offsets For Skylines

      By niZmO_Man · Posted

      8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...