Jump to content
SAU Community

Recommended Posts

g'day fellas my bro is looking to sell his 32, mods are as follows.

engine:

s1 rb 25

splitfire coils

blitz injectors

z32 afm

tomei rising rate fpr

garrett 3037s, braided lines

turbosmart 48mm progate

6 boost exh mani

alloy rad

greddy cooler

oil cooler & relo kit, braided lines

fuel:

040 lift pump

044 external pump

alloy surge tank

driveline:

25 box

xtreme drift clutch

nismo 2 way 4.3 ratio

s14 rear cradle, solid offset bushes

solid diff bushes

suspension/handling:

33 brakes all round

project mu handbrake shoes

kazzama castor rods

custom shortened upper arms/nolathane bushes

cusco rear camber & toe arms

tien HA coilovers front & rear

front & rear strut braces

s14 lca's/boxed up

gtr rear swaybar

alloy steering bush

currently running stock 32 knuckles with s14 tie rods & ends

inside:

bride fixed back seat/ok condish. on genuine bride rail

deep dish s/wheel

boost guage

wheels:

front: work 17x9 +11 meshies with 90% ku36's

rear: work equip 18x9.5 +41 with shagged neutons

spares: 4x roh drift R's 18x8.5? + 38? all with 50% neutons

2x 17x8.5? + 28? equip's

2x 18x 8.5? + 30ish equip's, 1 cracked.

other:

3in dump/front pipe, screamer

3in straight through exh

bm44 brake master

ABS removed

wil also come with s14 steer rack with offset spacers which were used before when modded knucles were fitted until rhs one snapped, haha.

broken knucles and a pair of stock 32 one's can be included as well.

cars 70% stripped but will come with stock seats and most trim etc

prob a few bits and pieces missing.

this car has legit rego with this engine but is currently un-rego'd due to using it as a track car, but can be re rego'd if needed.

post-48317-0-73360400-1312797340_thumb.jpg

post-48317-0-10241800-1312798719_thumb.jpg

post-48317-0-02517200-1312798839_thumb.jpg

post-48317-0-81036300-1312798917_thumb.jpg

post-48317-0-55949700-1312798983_thumb.jpg

post-48317-0-66622500-1312799049_thumb.jpg

as for price, 14.5 k but am neg, not keen on swaps or parting it out.

ph 0423387100.

Link to comment
https://www.sau.com.au/forums/topic/373409-rb-25-r-32/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...