Jump to content
SAU Community

Recommended Posts

Pickup's from Runcorn/South Brisbane-can drop them off locally

All serious offer's will be considered

-17x10+15 lenso D1R rims in VGC

Sprayed gloss black-can add two 80% 235-45-17 Federal 595's for extra $$$

$430 ono

-Pair VGC 17x8 +38 Lenso D1R rims-both look almost new

Just fitted with near new 225/45/17 Federal 595 tyres-will sell rims seperatly

$500 ono

-3xRAYS Gram Light's T57RG 17x8+43

Two rims are near new/no gutter rash or damage at all-fitted with 60% 215/45/17 Nankang tyres-both abit camber worn

Other rim rim is allgood except for a bit of light rash on edge

$300 ono

-Pair of WORK Meister 17x8 +40 S2R's

One rim has a bit of gutter rash in a section on outside edge-no biggie-other rim doesn't

Both Bridgestone Potenza REO5OA 225/45/17 tyres are about 60% now

Still on my r33-rims sit inside stock rear gaurds

$300 ono

-Pair DMAX 17x8 5 spoke rims

Sprayed black-no gutter rash

One rim has very slight flatspot

$130 ono

-Random 17x8+38 white mesh rims-no rash or damage-good skidders

$80 ono

-Stock s15 16x6.5 wheels in VGC-original silver paint

Only on rim has section of light gutter rash-rest are allgood

All tyres are 205-55-16 so good for AWD cars too

Two tyres are almost new-two are at least 50%

$470 ono

post-59075-0-30782500-1324481906_thumb.jpg post-59075-0-74918900-1324481916_thumb.jpg post-59075-0-78250600-1324481923_thumb.jpg

post-59075-0-56846900-1324482036_thumb.jpg post-59075-0-97671700-1324482051_thumb.jpg post-59075-0-74337000-1324482081_thumb.jpg

post-59075-0-22320700-1324482089_thumb.jpg post-59075-0-64627300-1324482112_thumb.jpg post-59075-0-30375500-1324482120_thumb.jpg

post-59075-0-68241100-1324482180_thumb.jpg post-59075-0-14503500-1324482193_thumb.jpg post-59075-0-27046800-1324482204_thumb.jpg

post-59075-0-56280700-1324482226_thumb.jpg post-59075-0-89694000-1324482248_thumb.jpg post-59075-0-40035800-1324482259_thumb.jpg

post-59075-0-24753800-1324482267_thumb.jpg

Also have these-there not going to fit my s14 without major camber adjustment's...

-Near mint 18x10+22 Lenso D1R rims-silver spokes 30mm chrome dish

Fitted with about 70% 225/40/18 tyres-bit camber worn

Can in include pair of brand new 235/45/18 Gemstone's for extra cash

$530 ono

post-59075-0-27053400-1324902401_thumb.jpg post-59075-0-87741200-1324902413_thumb.jpg

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Is it alright to top up with just another green coolant?
    • thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...