Jump to content
SAU Community

R33 Ganador / Aero Mirrors Great Condition With Adaptor!

Spunky Munky
 Share

Recommended Posts

Spunky Munky Grand Master

Spunky Munky

Posted
Posted

Hi fellas,

I have a set of Ganador or Aero side mirrors to suit a R33 GTST/GTR Skyline in BLACK which comes complete with all screws, wires and even plate adapters to bolt straight on flush!

They are in good condition with only minor scratches and are full-electronic which allows in-cabin remote adjustments but (like all mirrors of this make) do not fold in.

I cannot guarantee that these are genuine items but can confirm that they look much better than many replicas seen on other cars and do have patent-like writing on them which would indicate that they are either genuine or are high-end replicas. They are sold as is and only pick-up is available.

I bought them online not long ago and will sell for $250. So grab yourself a bargain!!

PM me for contact details and will drop off if close to Footscray VIC 3011 or can meet somewhere in the Western Suburbs for Pick up.

.

post-38197-0-48342900-1325399877_thumb.jpg

post-38197-0-31223800-1325399882_thumb.jpg

post-38197-0-94054700-1325399887_thumb.jpg

Spunky Munky Grand Master

Spunky Munky

Posted
  • Author
Posted

PM sent mate.

PM replied - tentatively sold to you.

Thanks for other PM's - will advise if sale falls through.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What should I do next to hold the head on

      By Dose Pipe Sutututu · Posted

      Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Dose Pipe Sutututu
      boost source Size Garrett gt28 gen2

      By Dose Pipe Sutututu · Posted

      Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...