Jump to content
SAU Community

Recommended Posts

Hi Everyone,

ive got the enkei circulars with a deep dish they have kuhmo ecsta all around 255/45 r17 60%tread all around which are currently on my r32

i prefer to swap them for a set of 32 gtr wheels with decent tread or will sell for $1000

pm me as i check my pm everyday..

cheers

chris

post-76652-0-38431400-1325513568_thumb.jpg

  • 3 weeks later...

sorry have not been able to get size and offset..

they fit perfect on the gtr and inside the guards the size im very certain is 17x9 feel free to come fit one to your car to see if its ok

still open for swaps after something different, prefer 32 33 gtr wheels or even 34 with some cash your way..

cheers

  • 5 months later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Was that with the cas upside or correct way up?
    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
×
×
  • Create New...