Jump to content
SAU Community

GSX-R V`s R1

Dawzey

By Dawzey,
in General Automotive Discussion

 Share

Recommended Posts

Dawzey Collaborator

Dawzey

Posted
Posted

Hi All

Time to upgrade my Bike.

i am looking at either a GSXR or an R1

i have been riding a RS250 and they are a ball of fun but the 2 stroke bike is getting to jumping for me.

the 04 R1 is opne of the best bikes i have ever riden, but i am looking at 2 ex demo 03 Bikes,

now both bike ride very nice but 1 is 1000cc and the other is a 750cc.

what do you guys think of these bikes??

i am tendning towards the R1 but i still want to get the right bike and i have only heard good things of the gsxr`s...

Thanks guys

Link to comment
https://www.sau.com.au/forums/topic/38831-gsx-r-vs-r1/
Share on other sites
DoughBoy Veteran

DoughBoy

Posted
Posted

Depends alot on what you want to use it for. If, like 90% of R1 owners, you want to do laps around shopping malls and McDonalds carparks then get the R1. People know it's the best.

If you actually want to use the bike then you'll have to make the decision yourself. What are you planning to do? Commute? Track days?

Link to comment
https://www.sau.com.au/forums/topic/38831-gsx-r-vs-r1/#findComment-786846
Share on other sites
Dawzey Collaborator

Dawzey

Posted
  • Author
Posted

i work for ford(i know poor me) but i sell GT`S AND GT-P so i guess it is o.k.

so i have an R33 and a work car, so i would only be using this for fun, i used my RS250 for fun and track and i guess this will be the same. i would only ride it 1 time a week if that.

i like the look of the 2003 R1 but i don`t want to be a follower,

i think in the end i will go the GSXR,

well as you can see i don`t know what i am going to go...

Link to comment
https://www.sau.com.au/forums/topic/38831-gsx-r-vs-r1/#findComment-786939
Share on other sites
stu_r30 Collaborator

stu_r30

Posted
Posted

only going to ride it once a week? may i ride it on the 6 free days?

but seriously, take both for a good ride - read : borrow for the day then make up your mind as to which will suit your needs

both bikes = licence taker within seconds - just comes down to taste

Link to comment
https://www.sau.com.au/forums/topic/38831-gsx-r-vs-r1/#findComment-787183
Share on other sites
Silver-Arrowz Grand Master

Silver-Arrowz

Posted
Posted

New GSXR750 if you're going to do track days. It's not as heavy as a 1000cc bike, the chassis is the same as the GSXR600 and is only 1kg heavier than the 600. Oh, and on paper it can clock 299km/h. But that's only cause the speedo stops there. :D

Link to comment
https://www.sau.com.au/forums/topic/38831-gsx-r-vs-r1/#findComment-787936
Share on other sites
drifto Collaborator

drifto

Posted
Posted

I've ridden the 2000 gsxr 750 and the 2002 gsxr 1000.

750 is track god

1000 is street beast and track weapon.

1000 against r1, have completely different feel.

Don't discount a 2nd 2004 1000 fireblade or even zx10 bothare weapons.

Depends on what you feel more comfortable with doing the riding your intending to do.

There aint a bad bike out there some just better then others.

Went to Wakefeild today too, r1 on poll then two fireblades then the suzi.

Link to comment
https://www.sau.com.au/forums/topic/38831-gsx-r-vs-r1/#findComment-787954
Share on other sites
autObarn Enthusiast

autObarn

Posted
Posted
Depends alot on what you want to use it for. If, like 90% of R1 owners, you want to do laps around shopping malls and McDonalds carparks then get the R1. People know it's the best.

If you actually want to use the bike then you'll have to make the decision yourself. What are you planning to do? Commute? Track days?

i saw a bunch of r1 owners maybe 10-12 down at magic mountain carpark hanging out in kappa trackies and singlets. oh they were all blue....... very sad. still like r1's and lots of my mates ride em but they seen becoming a parked, stand next to posers bike.

i ride every chance i get and are also in the market 4 a new bike. zx10 real wild animal very fun/challenging to ride always trying to lift front, more than anything else ive ever ridden (inc gsxr100) sooo much grunt. i am waiting for the cbr before i make a decision, spoke to a few guys who bought some of the race release bikes for phillip island a while back and they said it was very forgiving and easy to ride fast, whereas the zx10 felt like it was quicker, it pulled relatively the same times, less fatiguing on long rides maybe? have to wait and see..

to make things harder 04 gsxr-1000, free yoshi pipe and goodrige staino lines etc all for 16.5k??? decision is too hard.

Link to comment
https://www.sau.com.au/forums/topic/38831-gsx-r-vs-r1/#findComment-788502
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • dbm7
      Automatic Power Button Light Flashing

      By dbm7 · Posted

      Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Duncan
      R34 Plug Identification

      By Duncan · Posted

      Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • joshuaho96
      Automatic Power Button Light Flashing

      By joshuaho96 · Posted

      Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • BOLGE
      R34 Plug Identification

      By BOLGE · Posted

      Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...