Jump to content
SAU Community

Recommended Posts

Don't let me detract from your sale, this is a very nice car, i looked at the website.

Correct me if i am wrong, but, according to the dyno chart, that power output was made at 25psi at a theoretical speed of 185km/h.

That would explain the big power output from such limited mods.

Is that an aftermarket sunroof too ??

All in all, good car for the money, good luck with the sale.

Mr Rb20 No dude. See how there is 2 black lines and 2 red lines, one set of lines is for how many kw and for how much boost is running at that time. The red lines read 185kws at 8 psi and the black reads 201kw at 12psi. Also see as the car gets to 201kw the boost that its running drops down close to 10psi, wich is natural for it to do.

Don't let me detract from your sale, this is a very nice car, i looked at the website.

Correct me if i am wrong, but, according to the dyno chart, that power output was made at 25psi at a theoretical speed of 185km/h.

That would explain the big power output from such limited mods.

Is that an aftermarket sunroof too ??

All in all, good car for the money, good luck with the sale.

Hell NO 25psi, my turbo would have been out the exhuast at that much psi dude...

This is a standard turbo and computer not even a SAFC no bullshit with a proper upgrade front mount with exhaust at max 13psi producing 201kw.

Fair enough. That's were the big power comes from then, shoot out mode reads a lot higher than tune. It's supposed to be for 'shoot outs' (duh) and consistent across different dynos, but people change setttings etc. and it makes it unconsistent which makes it hard to say how much power it really produces... that said a mate of mine had his VK 308 dyno'd in shoot out mode and it put down 158rwkws which would be very close to engine power not rear wheel power. Nice car mate anyways mate, still interested in it. Could you please send pics to my email? [email protected]

Just I can't see them here. It's blocked on my end.

ALT 18" WITH 265 AT THE REAR 245 AT THE FRONT.

MY PRICE IS NOT INCREASING....I JUST DONE SOME RESEARCH ON THE NET AND I REALISED THE PRICE THAT I WAS ASKING FOR IS A BIT LOW WITH ALL MY MODS, ACCESSORIES AND CONDITION OF THE CAR SO I DECIDED TO BUMP IT UP 1g

don't you know skylines appreciate with time......jus wait till u actually go and see the car he'll probably jack it up more..... its a collectors model with extra high head rest adjustment :usuck: and its also gts-t now how rare are they these days be quick boys jus been valued by nissan they sounded really keen on it!!!

u guys who are saying 201 is really high, well dynos are really meant for tuning, and its well known that figures vary a lot between dynos, so u cant say 201 is too high, because in that case, why is it too high? where is your control point?

just as a guide (not to take away from how powerful the car may be...)

most people say that a gts-t with just a cat back is good for about 130rwkw.. well at the place that ron15h had his dyno done, (unigroup if im not mistaken) they say that most near stock gts-ts produce around 145-155 rwkw.

i got my car dynoed there.. 96 gts-t with in box filter, and (resrictive because of defect) cat back exhaust. the figure was 165rwkw..

so you could say that this car for sale is capable of producing around 20% more power than stock. this would be an easier way to measure things up rather than dyno figures from all over the place :(

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...