Jump to content
SAU Community

Recommended Posts

Hi here I have my hks2530 for sale for sr20det

off my 180sx made 250.8rwkw on unigroup dyno

Super responsive made 22psi by 3400rpm spike down to 19psi due to faulty ebc

excellent cond little to no shaft play near new 1 bar actuator

Bolt on for s14/15 or 180sx and s13 with and s14or15 intake snout

Pics will be up tomorrow as that's when I'll be removing it only changing as going bigger and chasing more power

Located syd west

Contact pm me

Willing to post at buyers expense

Price $650 Ono

Link to comment
https://www.sau.com.au/forums/topic/390537-hks2530/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Was that with the cas upside or correct way up?
    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
×
×
  • Create New...